F/S Stock MG and everything to upgrade it.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jason4636
    Senior Member
    • Jun 2012
    • 654

    #1

    F/S Stock MG and everything to upgrade it.

    I have a Miss Geico that is all stock, but I changed out all the connectors to 5.5mm and it has a X-445 prop. It does have a small hair line crack where the hull joins together, on the right hand side about 2" long towards the rear. Plus the factory hatch pin in the front was epoxied back in place by the previous owner. Pic's below.


    Here's what all if for sale. All these price's are what you would pay for new part. But I'll ship them for free.
    Miss Geico - $250
    Leopard 4082 2200kv with 40x40mm w/j - $75 (new)
    CF 4074/4082 motor mount (New) - $25
    MG upgraded flex cable (New) - $25
    Hobbywing Seaking 180a esc (used with 8-10 runs on it on 4s) - $80
    MG fiberglass hatch (New) - $40
    Polished 4074 water jacket (new) - $13
    Traxxas 2056 Watterproof servo (New) $28
    Standard machined aluminum servo mount (New) $10
    X-642 (New) $13
    M-445 (New) $13
    CF and Kevlar fabric orange and black 2 sheets 16x24 (New) $40
    CF and Kevlar fabric orange and black 1 sheet 12x16 (New) $10
    Plus a spare flex cable

    Everything adds up to $622.00. I'll sell it as a bundle for $550 shipped. U.S. state side shipping only for this price.

    I'm open to trades. Looking for a FC Cheetah hull, or a DF 45" sniper hull, DF 41" mono hull
    6.JPG1.JPG5.JPG11.JPG7.JPG
    Last edited by Jason4636; 09-24-2012, 09:01 PM.
  • Jason4636
    Senior Member
    • Jun 2012
    • 654

    #2
    More pics
    14.JPG8.JPG9.JPG10.JPG13.JPG

    Comment

    • Jason4636
      Senior Member
      • Jun 2012
      • 654

      #3
      IMAG0084.jpg15.jpg16.jpgal_servo_mount_011.jpg

      Comment

      • darrin4800
        Senior Member
        • Aug 2011
        • 919

        #4
        I would like the servo mount and the 12 x 16 kevlar sheet if you split ti up.

        Comment

        • Jason4636
          Senior Member
          • Jun 2012
          • 654

          #5
          I'm going to let it run for tonight as a package deal. Unless I can get offers on most of the stuff. Then I'll split it up.

          Darren your first in line on the CF an servo mount.

          Comment

          • slowornge50
            Junior Member
            • Aug 2012
            • 7

            #6
            I would take the leopard 4082 and the mount, if you decide to seperate.
            Last edited by slowornge50; 09-28-2012, 09:49 PM.

            Comment

            • Jason4636
              Senior Member
              • Jun 2012
              • 654

              #7
              Originally posted by slowornge50
              I would be take the leopard 4082 and the mount, if you decide to seperate.
              Your first in line if I seperate

              Comment

              • darrin4800
                Senior Member
                • Aug 2011
                • 919

                #8
                I am in for the servo mount and kevlar if you do spit it up.

                Comment

                • Jason4636
                  Senior Member
                  • Jun 2012
                  • 654

                  #9
                  Originally posted by darrin4800
                  I am in for the servo mount and kevlar if you do spit it up.
                  Sounds good, I'll let you know if I seperate

                  Comment

                  • megalops
                    Fast Electric Freak
                    • Aug 2011
                    • 249

                    #10
                    I'll take the Fiberglass hatch if split up
                    "If you can't win - Wreck someone who can!"

                    Comment

                    Working...