PB Stilletto motor, Keda 2300 4D, Lehner 4200XL, PB MissG Hardware

[ray schrauwen]

JUST PB MOTOR LEFT, PRICE DROP TO $55 shipped or $50 pick up or drop off at this Sundays GRMM meeting!!



PB Stilletto motor has one 4 minute Spec Class run on it and I just soldered brand new 5.5mm Bullets on there.

Please post dibs here.

[ray schrauwen]

..............

[Make-a-Wake]

I'll throw out a plug for the Keda motors..........i own two and they are great 4 polers. That 2364kv would be a nice 4s motor for P mono.

[siberianhusky]

What do you think that lehner would do in my JAE 12 on 2s.
Blew the nitro motor up. Have a plan in mind for the conversion, requires building new sponsons to re locate the boom tubes.
Water jacket available anywhere for it?
Could be interested in it, would have to be shipped, work has been to crazy to get away for any socializing!
Cheers and Happy New year. Hope I can get up for another visit in the not to distant future, almost time for my twice a year shopping trip to the city, go play guitars I can't afford. Kind of shopping for a violin. It'll be like the mandolin, buy one and a week later you're on stage with it.

[ray schrauwen]

Thanks Guys!

Hey Mark, it would be quite fun on 2S with a 35mm prop in the Jae 12 if it will fit. I'll have to consult a buddy that either made a Jae 12 or 21 into a 2S rigger thats quite a nice runner.

I could try to find a jacket for it too. No rush.

The funny thing is, the fastest guy in our club uses allot of big Lehner motors. Runs the living snot out of them and they keep going.

Talk soon..

Can you say Budder?!

[jimi911]

I'll take the Lehner Ray.

[siberianhusky]

LMAO maybe later! It's only 6!
It will fit but not with anything in the stock location, motor goes farther back, rear boom tube moved back and up. And as long as the packs are under 135mm long and 18mm high you can fit a pair of 2s 3300map 40c packs up front. Major rebuild but I don't think I'll be spending the money for a NR 12 since I blew up my old engine real good!
Motor mount is a piece of aluminum C channel. Esc goes right in front of the motor, rx back port corner, mg, high torque servo on the other side.
I'll send you the money tomorrow, have to load up my online visa, emptied out my PP account last week. Haven't transferred more into it yet.
Guys in Europe run the crap out of these motors! Good quality 2 pole motor, nothing wrong with that.

[ray schrauwen]

Eeeew, this hurts. Jim, Mark kinda had interest first but, I dunno what to do? I think Mark was just waiting for my response. I think Mark should get dibs but, I'm really sorry.

If either are interested I also have a pair of Tacon 2860-5050kv motors I can part with. They can be just as much fun. Both are new but have only 4mm shaft. 4 Pole orange motors, $35 for either....

http://www.hobbypartz.com/96m822-2860-5050kv.html

[ray schrauwen]

Actually, very similar numbers except for KV.

[jimi911]

No worries Ray ... he can have it.

[Alexgar]

ill take the lehner

[siberianhusky]

Cheers Ray that will be to you tomorrow,

[Drax21]

The Keda Motors are fantastic. $79.99 on Kershaw Designs last time I looked. I use to run a 2364kv in a Pursuit on 4s with a X642(motor just warm) 58MPH and the motor sounded great!
I have had a CC 1515 2200kv since and I gotta say I prefer the Keda!! Oh and the motor is a 3D 4D is less KV see pic

[siberianhusky]

PP sent

[lectriglide]

I'm thinking about the Keda in a DF29 on 4s. Have a Himodel 200a esc in there now. Will it handle the amp draw of the D wind propped say m445? Also have a spare T180 if that would be better.