Ultimate HPR 115 "2Face-Design" by Christian, 90mph

[ManuelW]

Hello Guys,

today I'm allowed to sell something really really special.

HPR06 with 2Face Design by Christian "Die Feile" Fischer

Some facts:
hull: HPR06 in carbon-fibre, very strong version by HPR Powerboats
engines: LMT 1950/7 HiAmp with air- and watercooling plus rear supports (1760kv)
controllers: AS 26.150 Modellbauregler with double 4mm² per motor phase (special edition)
lipos: 2 sets with 2x 6S Turnigy 4000 40C each
airbrush: 2Face Design and ceramic clear-coat by Markus Steinhöfel (http://www.ateliermst.de)
propeller: Octura X447 Andy Brown
servo: Savöx SC 1251MG
receiver battery: 2300mAh 2S receiver battery by LRP with RX-Regulator by LRP
additional: catpower emergeny cut-off, carbon fibre lipo mount rail system with "Supercat"-design, controller-hatches out of carbon fibre, selfmade scale-rudder, selfmade scale-gearboxes, selfmade motor rear supports, stuffing tube coated with real carbon fibre, selfmade servo mount, hydraulic-steering by HPR, as far as possible all screws are anodized titanium, fron motor endbells polished, all plates are polished carbonfibre,...

speed: ~90km/h lt. GPS in everyday use, with bigger props more is possible


The boat is in absolutely perfect condition, can be used for display purposes as well as fast runs on the lake. There was also an 8 page long article in the local SchiffsModell paper. If really interested in the boat, I can forward the article. There is also a very long and maybe quite famous building review in the RC powerboat forum (LINK). In these 125 answers nearly any detail of the build is shown with a lot of photos. So always interesting to look through. Overall in the building and airbrushing of the boat more than 500 working hours were spent. All the carbon fibre parts were cut out with a saw and a file, thats why here we call him Christian "the file" Fischer or maybe Sir-file-a-lot.
The precision and the quality of the parts is superior and outstanding.

Please only write serious offers and questions, contact is over me via PM or eMail. Should you know somebody who'd be interested in such an ultimate boat I'd be also pleased if you forward the information. Its definitely not necessary to seem the boat, we are looking for somebody who really wants this unique boat and is also willing to appreciate the invested material as well as the countless working hours.

So I wish you a nice evening from Austria,
ManuelW

videos:






pictures:












You'll find more pictures in the gallery of HPR-Powerboats

Price: 6500$ + Shipping

Best regards,
Manuel

[ironjaws]

I am interested. Please pm me a price. Thanks.

[Browning]

PM me a price too please !!!

[bracka69]

Pm me a price also. Thanks

[SJFE]

With all due respect I don't see why you just can't post the price. It soon may just be a requirement of selling on this forum.

[spicedcrab]

whats the price??????

[ManuelW]

As far as possible all PM's answered.

@ SJFE:
Well I would admit to you in 99% of the cases. As far as I see it, this is not even close to most of the things that are usually sold here. I've helped also a bit during the build and was also once allowed to run the boat - when you see it in real its more like a piece of art than a normal build.
Therefore I answered all PM's and everybody is allowed to make an offer for this RTR boat, to get a number price offers under 6000$ don't make any sense at the moment.

Best regards,
Manuel

[SJFE]

Well I would admit to you in 99% of the cases. As far as I see it, this is not even close to most of the things that are usually sold here. I've helped also a bit during the build and was also once allowed to run the boat - when you see it in real its more like a piece of art than a normal build.
Therefore I answered all PM's and everybody is allowed to make an offer for this RTR boat, to get a number price offers under 6000$ don't make any sense at the moment.

Best regards,
Manuel

My point of view is when an item is listed for "sale" potential buyers enter into the sale with an expectation of knowing the price and not being in competition to make the purchase. When the price is kept private and the buyers are instructed to make offers or bid against one another the transaction then becomes a "silent auction". Thats what caught my attention. I have been intrusted to ensure all the listings and items are represented accurately. Now of course it's you right to set the terms for the listing as you see fit & I of all people respect that. I'll also say for the record that I'm making no assumptions in regard to your integrity. The private bidding system does run a risk of causing bad feelings. Guys just don't know for sure if their offers are being bumped & to what extent.
Best of luck with your sale & it is a stunning piece of artwork.
Tommy G

[crrcboatz]

My point of view is when an item is listed for "sale" potential buyers enter into the sale with an expectation of knowing the price and not being in competition to make the purchase. When the price is kept private and the buyers are instructed to make offers or bid against one another the transaction then becomes a "silent auction". Thats what caught my attention. I have been intrusted to ensure all the listings and items are represented accurately. Now of course it's you right to set the terms for the listing as you see fit & I of all people respect that. I'll also say for the record that I'm making no assumptions in regard to your integrity. The private bidding system does run a risk of causing bad feelings. Guys just don't know for sure if their offers are being bumped & to what extent.
Best of luck with your sale & it is a stunning piece of artwork.
Tommy G

HERE, HERE!!! Glad 2 c a mod. step in on this. This entire process just seems 2 b STRANGE!!

[1truckerdan]

WOW that Is art!

[ManuelW]

Thanks for the comment. The boat is still for sale.

Price: 6500$ + shipping and the boat is yours.
The used components alone are worth more than 6500$, the work is for "free".

Best regards,
Manuel

[ManuelW]

Price update: 5400$ + shipping

Best regards,
Manuel

[aryajet]

Wow Manuel you have quite a stunning array of boats in your sale ads and postings. I just wanted to chime in and say yes for boats that are "affordable" say under a $1000 it is perfectly appropriate to require price to be listed. But with a product like this I am sure it is appropriate to arrange and discuss with serious buyers on a private message basis, and just in the interest of full disclosure mention who is in line on the thread.....

Just out of curiosity out of all the people here mad that you didn't list a price, or posted many times to pm them a price. How many were seriously interested?? That being said, my friend I applaud all your boats and all your ads, it is a testament to the hobby and how far it can go.

Keep selling the quality projects brother. Keep building them as well!!!

P

[johnf]

5400 is cheap for something like this. Hull / hardware / and electronics alone easily surpass 3k. I've gotten a price quote for labor on a basic no frills build of this same hull from a reputable builder here, and can safely say I'd be near 5k to set one up with NONE of the show quality features this has. Amazing deal for someone.

[aryajet]

5400 is cheap for something like this. Hull / hardware / and electronics alone easily surpass 3k. I've gotten a price quote for labor on a basic no frills build of this same hull from a reputable builder here, and can safely say I'd be near 5k to set one up with NONE of the show quality features this has. Amazing deal for someone.

Perfect timing!!! This is exactly what I am trying to say. The people (like yourself) interested in a boat like this know exactly what they are looking at.....