Tweet
Robitronic 1/18 electric Pan Car. This ultra-lightweight Pan Car-Style Chassis contains a High Performance POWER 300 Motor and is prepared for a 4 Cell-Battery-Pack. The high efficiency Drive train, the ultra low Point of Gravity with a GT-Style-Body with high Down force, the ingenious Suspension and the Factory-glued Foam-Tires makes this Car into a Rocket on the Track.
Features:
• High efficiency Drive train
• 1.5mm Carbon-ultra light-Chassis
• 4 Cell Layout (2/3 A batteries)
• Ultra-low point of gravity
• Fiber-glass Anti-roll Antenna
• Servo post fits standard micro servo
• Fully adjustable Carbon-Suspension-Arms
• Fully adjustable Friction-Plate Dampening-System
• Adjustable Rear-Shock
• Adjustable Tweak of T-Bar with Set Screws
• CNC-Aluminum Gear-plates
• Adjustable Ride-Height
• Adjustable Heavy-Duty Ball-Differential
• 3 different Spur-Gears and 8 Pinion-Gears included
• Easy Quick-Release Battery-Mount-System
• Pre-glued and sanded Foam-Tires on Rims
• Robitronic POWER 300 High-Power Motor 4.8V
• Ultra-Low GT-Style Racing Body
Specification
• Length: 180mm
• Width:110mm
• Wheelbase:129mm
• Height: 55mm
• Weight: 320g
• Battery (included): 2/3A 4cells
• Servo (included): Micro-Servo (30x12x30mm)
Additional items/parts included that are not part of the kit:
• Monster Termination Motor from Team Trinity. FEATURES: For use with either 5 or 6 cell batteries, Changeable brushes and springs, TRIC1350 (included two pair). Pre-installed capacitors and leads, Dual precision bearings support the commutator, Adjustable timing, and stronger magnets for greater torque. This is one of the fastest micro motors on the market. Condition: One, never used.
• Trinity Brush and Spring Set for the Micro Monster Motor, TRIC11999. FEATURES: Restores factory performance to motors with worn brushes and springs. INCLUDES: Two brushes and two springs for the Micro Monster Motor. Condition: Pair, never used.
• Venom Fireball Micro Motor. FEATURES: 370 can size. Capacitors soldered on motor. Motor wires and yellow micro RS4 connector. Performs best with NiCds or NiMH batteries. Rated to be faster than the stock Robitronic Power 300 the Scalpel comes with. Condition: One never used.
• 12 Tooth Pinion Gear. FEATURES: Steel construction, silver in color. INCLUDES: One 48 pitch pinion gear, One 3x3mm set screw (ASCC9705) SPECS: Length: .39" (10mm) Mounting hole diameter: 2mm. Condition: One, never used.
• Team Integy Alloy Motor Heat sink. Fits the stock, Venom and Team Trinity monster motors. FEATURES: Aluminum Construction. Anodized Red in Color, CNC Machined. Condition: One, never used. One on the car already.
• DuraTrax Carrier Bag for the HPI Micro RS4 and transmitter. FEATURES: Perfect for the Micro RS4 or any 1/18 scale R/C car. Constructed of durable black and red nylon with webbed support. Internal foam cushions both car and transmitter. Storage areas for spare batteries, parts, transmitter antenna and tires. Padded lid seals with a secure double-pull zipper. Carrying handle plus adjustable, detachable shoulder strap Condition: never used.
• Replacement Lower Pod Plate-Right for use with Robitronic Scalpel Pro Kit. FEATURES: Aluminum Construction Red in Color. Allows for brushless motors to be installed which the stock included plate does not. Condition: One, never used.
• Replacement Plastic Set A for use with Robitronic Scalpel Pro Kit. FEATURES: Nylon Construction, Black in Color. INCLUDES: Two Battery Hold Down Straps, Two Battery Trays, One Front Body Mount Plate. Condition: One, never used.
• The Robitronic Scalpel 1/18 scale Body in blue. FEATURES: Sturdy plastic construction, Black, white and blue in color, Self adhesive decal sheet INCLUDES: One car body, one decal sheet. Condition: One, never used. You are getting two, one is clear that the car comes with.
• Replacement Plastic Set C (Steering, Ride Height) for use with Robitronic Scalpel Pro Kit. FEATURES: Nylon Construction, Black in Color. INCLUDES: Six Rear Axle Height Adjusters Two Steering Knuckles, Three Servo Arms, Two Steering Bell cranks.
• The HS-81MG Micro Servo from Hitec with the Universal Futaba J, Hitec S, JR and Airtronics Z Connector. Connector is compatible with all modern receivers and wiring accessories. FEATURES: Lightweight and small; ideal for sailplane or weight-sensitive applications Strong, durable metal gears INCLUDES: One HS-81MG metal gear micro servo, Two screws, grommets and eyelets Two servo arms and one wheel. SPECS: Length: 29.8mm Weight: 12mm Height: 29.6mm (1.17" x 0.47" x 1.16") Transit: 0.11 sec/60° (4.8V) 0.09 sec/60° (6.0V) Torque @ 4.8V: 2.6 kg-cm, (36.1 oz-in) @ 6.0V: 3 kg-cm, (41.66 oz-in) Weight: 19g (0.67oz) (Hitec Servo saver included and installed).
• Replacement Lower Pod Plate for use with Robitronic Scalpel Pro. FEATURES: Aluminum Construction, One Aluminum Lower Power Pod Plate 1.5mm. Condition: One, never used.
• Replacement Rear Axle for use with Robitronic Scalpel Pro. FEATURES: Hardened Steel Construction INCLUDES: One Hardened Steel Rear Axle. Condition: One, never used. Not in pic, new in bag.
• Differential Ball 3mm for use with the Robitronic Scalpel 1/18 on-road car. FEATURES: Steel Construction, Polished Silver in Color. INCLUDES: Ten 3mm Steel Differential Balls. Installed in extra spur gear as kit does not include enough for using of other spur gear.
• Replacement Plastic Set B for use with Robitronic Scalpel Pro. FEATURES: Nylon Construction INCLUDES: Four Body Posts, Four Body Mount Washers, Four Long Ball Ends, Two Short Ball Ends.
• Novak Spy Micro Reversible Speed Controller with Reverse. It is specifically designed for use with most 4-7 cell, 1/24 - 1/18 scale R/C cars. FEATURES: Orange plastic case speed controller. Forward/Reverse speed controller, One-Touch Set-Up, Radio Priority Circuitry, Polar Drive Technology, Thermal Protection, Smart Braking, Reverse Disable, Universal servo connector. SPECS: Dimensions: 1.12in x 0.95in x 0.48in (28.45mm x 24.13mm x 12.06mm) Motor Limit: 280 Size Micro RS4 Motors, Motor Power Limit: 10W (continuous), Input Voltage: 4 to 7 cells (4.8V-7.2V), Rated Current(FWD/REV): 25A, ON-Resistance: 0.00645, Braking Current: 25A, BEC Voltage: 5.0V DC, BEC Current: 1A, PWM Frequency: 1000Hz, Weight: .51oz (14.4g).
• Pair of the Rear Wheels for the Robitronic Scalpel Pro. FEATURES: Plastic wheels with pre-glued hard foam tires. White Dot Compound (Super-soft) SPECS: Width: 0.97" (24mm) Diameter: 1.2" (31.5mm) Hole Diameter: 0.20" (5mm) Included: 2 extra pair; Condition: Never Used.
• Pair of the Front Wheels for the Robitronic Scalpel Pro. Plastic wheels with pre-glued soft foam tires INCLUDES: Two Front Wheels for the Robitronic Scalpel SPECS: Width: 0.63" (16mm) Diameter: 1.2" (31.5mm) Hole Diameter: 0.20" (5mm) Included: 2 extra pair; Condition: Never Used.
• FX-II tire traction compound is similar to Paragon's Ground Effects; product except that it has more bite and fewer odor. Works great on all surfaces including dirt ovals. For foam tires. 1 4oz can. Not in Pic. http://www3.towerhobbies.com/cgi-bin...&I=LXDT06&P=ML
• Elite 1500 2/3A. Best 2/3A cell on the market. Forget IB1400's this cell has them beat and at a lower cost. Guarantee this cell will out perform the IB1400. Eight total included. Four are assembled into pack with connector. Four are separate cells not assembled.
$136.99 cost of kit alone. See http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXPWJ1 Full kit home page: http://www.robitronic-usa.com/index.php?page=752
Not included and needed: Battery charger and Radio (FM or AM) one servo is already installed, speed controller and motor, ready to run. Note: Car has only been driven ONCE on carpet to test with tape on the under body to protect it. NO SCRATCHES at all! I can take more pics of what you are interested in a lot closer to see the quality. This car is fast on the stock and Venom motors, so can only imagine on the Trinity that was never installed!
Total cost everything is way over $388.00
Tower Hobbies still sells all the parts for this car so this is the current release. http://www3.towerhobbies.com/cgi-bin...I=RBOC3920&P=Z
>UPDATED: Asking $150.00
Any questions please feel free to inquire. I may have a radio to throw in (AM one if you are seriously interested)
Thank you for looking.
SOLD!
Features:
• High efficiency Drive train
• 1.5mm Carbon-ultra light-Chassis
• 4 Cell Layout (2/3 A batteries)
• Ultra-low point of gravity
• Fiber-glass Anti-roll Antenna
• Servo post fits standard micro servo
• Fully adjustable Carbon-Suspension-Arms
• Fully adjustable Friction-Plate Dampening-System
• Adjustable Rear-Shock
• Adjustable Tweak of T-Bar with Set Screws
• CNC-Aluminum Gear-plates
• Adjustable Ride-Height
• Adjustable Heavy-Duty Ball-Differential
• 3 different Spur-Gears and 8 Pinion-Gears included
• Easy Quick-Release Battery-Mount-System
• Pre-glued and sanded Foam-Tires on Rims
• Robitronic POWER 300 High-Power Motor 4.8V
• Ultra-Low GT-Style Racing Body
Specification
• Length: 180mm
• Width:110mm
• Wheelbase:129mm
• Height: 55mm
• Weight: 320g
• Battery (included): 2/3A 4cells
• Servo (included): Micro-Servo (30x12x30mm)
Additional items/parts included that are not part of the kit:
• Monster Termination Motor from Team Trinity. FEATURES: For use with either 5 or 6 cell batteries, Changeable brushes and springs, TRIC1350 (included two pair). Pre-installed capacitors and leads, Dual precision bearings support the commutator, Adjustable timing, and stronger magnets for greater torque. This is one of the fastest micro motors on the market. Condition: One, never used.
• Trinity Brush and Spring Set for the Micro Monster Motor, TRIC11999. FEATURES: Restores factory performance to motors with worn brushes and springs. INCLUDES: Two brushes and two springs for the Micro Monster Motor. Condition: Pair, never used.
• Venom Fireball Micro Motor. FEATURES: 370 can size. Capacitors soldered on motor. Motor wires and yellow micro RS4 connector. Performs best with NiCds or NiMH batteries. Rated to be faster than the stock Robitronic Power 300 the Scalpel comes with. Condition: One never used.
• 12 Tooth Pinion Gear. FEATURES: Steel construction, silver in color. INCLUDES: One 48 pitch pinion gear, One 3x3mm set screw (ASCC9705) SPECS: Length: .39" (10mm) Mounting hole diameter: 2mm. Condition: One, never used.
• Team Integy Alloy Motor Heat sink. Fits the stock, Venom and Team Trinity monster motors. FEATURES: Aluminum Construction. Anodized Red in Color, CNC Machined. Condition: One, never used. One on the car already.
• DuraTrax Carrier Bag for the HPI Micro RS4 and transmitter. FEATURES: Perfect for the Micro RS4 or any 1/18 scale R/C car. Constructed of durable black and red nylon with webbed support. Internal foam cushions both car and transmitter. Storage areas for spare batteries, parts, transmitter antenna and tires. Padded lid seals with a secure double-pull zipper. Carrying handle plus adjustable, detachable shoulder strap Condition: never used.
• Replacement Lower Pod Plate-Right for use with Robitronic Scalpel Pro Kit. FEATURES: Aluminum Construction Red in Color. Allows for brushless motors to be installed which the stock included plate does not. Condition: One, never used.
• Replacement Plastic Set A for use with Robitronic Scalpel Pro Kit. FEATURES: Nylon Construction, Black in Color. INCLUDES: Two Battery Hold Down Straps, Two Battery Trays, One Front Body Mount Plate. Condition: One, never used.
• The Robitronic Scalpel 1/18 scale Body in blue. FEATURES: Sturdy plastic construction, Black, white and blue in color, Self adhesive decal sheet INCLUDES: One car body, one decal sheet. Condition: One, never used. You are getting two, one is clear that the car comes with.
• Replacement Plastic Set C (Steering, Ride Height) for use with Robitronic Scalpel Pro Kit. FEATURES: Nylon Construction, Black in Color. INCLUDES: Six Rear Axle Height Adjusters Two Steering Knuckles, Three Servo Arms, Two Steering Bell cranks.
• The HS-81MG Micro Servo from Hitec with the Universal Futaba J, Hitec S, JR and Airtronics Z Connector. Connector is compatible with all modern receivers and wiring accessories. FEATURES: Lightweight and small; ideal for sailplane or weight-sensitive applications Strong, durable metal gears INCLUDES: One HS-81MG metal gear micro servo, Two screws, grommets and eyelets Two servo arms and one wheel. SPECS: Length: 29.8mm Weight: 12mm Height: 29.6mm (1.17" x 0.47" x 1.16") Transit: 0.11 sec/60° (4.8V) 0.09 sec/60° (6.0V) Torque @ 4.8V: 2.6 kg-cm, (36.1 oz-in) @ 6.0V: 3 kg-cm, (41.66 oz-in) Weight: 19g (0.67oz) (Hitec Servo saver included and installed).
• Replacement Lower Pod Plate for use with Robitronic Scalpel Pro. FEATURES: Aluminum Construction, One Aluminum Lower Power Pod Plate 1.5mm. Condition: One, never used.
• Replacement Rear Axle for use with Robitronic Scalpel Pro. FEATURES: Hardened Steel Construction INCLUDES: One Hardened Steel Rear Axle. Condition: One, never used. Not in pic, new in bag.
• Differential Ball 3mm for use with the Robitronic Scalpel 1/18 on-road car. FEATURES: Steel Construction, Polished Silver in Color. INCLUDES: Ten 3mm Steel Differential Balls. Installed in extra spur gear as kit does not include enough for using of other spur gear.
• Replacement Plastic Set B for use with Robitronic Scalpel Pro. FEATURES: Nylon Construction INCLUDES: Four Body Posts, Four Body Mount Washers, Four Long Ball Ends, Two Short Ball Ends.
• Novak Spy Micro Reversible Speed Controller with Reverse. It is specifically designed for use with most 4-7 cell, 1/24 - 1/18 scale R/C cars. FEATURES: Orange plastic case speed controller. Forward/Reverse speed controller, One-Touch Set-Up, Radio Priority Circuitry, Polar Drive Technology, Thermal Protection, Smart Braking, Reverse Disable, Universal servo connector. SPECS: Dimensions: 1.12in x 0.95in x 0.48in (28.45mm x 24.13mm x 12.06mm) Motor Limit: 280 Size Micro RS4 Motors, Motor Power Limit: 10W (continuous), Input Voltage: 4 to 7 cells (4.8V-7.2V), Rated Current(FWD/REV): 25A, ON-Resistance: 0.00645, Braking Current: 25A, BEC Voltage: 5.0V DC, BEC Current: 1A, PWM Frequency: 1000Hz, Weight: .51oz (14.4g).
• Pair of the Rear Wheels for the Robitronic Scalpel Pro. FEATURES: Plastic wheels with pre-glued hard foam tires. White Dot Compound (Super-soft) SPECS: Width: 0.97" (24mm) Diameter: 1.2" (31.5mm) Hole Diameter: 0.20" (5mm) Included: 2 extra pair; Condition: Never Used.
• Pair of the Front Wheels for the Robitronic Scalpel Pro. Plastic wheels with pre-glued soft foam tires INCLUDES: Two Front Wheels for the Robitronic Scalpel SPECS: Width: 0.63" (16mm) Diameter: 1.2" (31.5mm) Hole Diameter: 0.20" (5mm) Included: 2 extra pair; Condition: Never Used.
• FX-II tire traction compound is similar to Paragon's Ground Effects; product except that it has more bite and fewer odor. Works great on all surfaces including dirt ovals. For foam tires. 1 4oz can. Not in Pic. http://www3.towerhobbies.com/cgi-bin...&I=LXDT06&P=ML
• Elite 1500 2/3A. Best 2/3A cell on the market. Forget IB1400's this cell has them beat and at a lower cost. Guarantee this cell will out perform the IB1400. Eight total included. Four are assembled into pack with connector. Four are separate cells not assembled.
$136.99 cost of kit alone. See http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXPWJ1 Full kit home page: http://www.robitronic-usa.com/index.php?page=752
Not included and needed: Battery charger and Radio (FM or AM) one servo is already installed, speed controller and motor, ready to run. Note: Car has only been driven ONCE on carpet to test with tape on the under body to protect it. NO SCRATCHES at all! I can take more pics of what you are interested in a lot closer to see the quality. This car is fast on the stock and Venom motors, so can only imagine on the Trinity that was never installed!
Total cost everything is way over $388.00
Tower Hobbies still sells all the parts for this car so this is the current release. http://www3.towerhobbies.com/cgi-bin...I=RBOC3920&P=Z
>UPDATED: Asking $150.00
Any questions please feel free to inquire. I may have a radio to throw in (AM one if you are seriously interested)
Thank you for looking.
SOLD!
Comment