FS HV ESC and CC80

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • m4a1usr
    Fast Electric Addict
    • Nov 2009
    • 2038

    #1

    FS HV ESC and CC80

    Going thru my spares boxes and getting rid of some extras. First up is a Sentillon HV 2-12S 100amp controller. This is the second version with some mod's. I put 5 50volt caps on it, the stock came with only 2 And the motor leads were changed out to 10ga as they came originally with 12ga. I also added a cooling fan for the heat sink. It was my bench tester for motors. Has 5.5.mm bullets both sides. Nice to have if you want to verify your motor condition. Works with all pistol grip transmitters. $75 shipped.

    Second picture shows a CC Barracuda 80 ESC. Had this in my SV27 for awhile. Perfect upgrade for the stock motor. Probably would be fine if you wanted to upgrade to another motor as well. SV27's dont pull too many amps when you have them dialed in. Comes with the Castle 6mm bullets installed. $60 shipped.

    John



    Change is the one Constant
  • m4a1usr
    Fast Electric Addict
    • Nov 2009
    • 2038

    #2
    Sort of weekly bump!

    John
    Change is the one Constant

    Comment

    Working...