Brushless Villain

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • FighterCat57
    "The" Fighter Cat
    • Apr 2010
    • 3480

    #1

    Brushless Villain

    This was a fun setup and my first FE boat. It's seen better days, but still runs!

    I'm wanting to get a new villain, so here's the old trusy/rusty Villain EX!

    The ESC's are 45 amp HK's, 2223 Turnigy 2900kv motors and stock size pinion/spur gears. Has the 540/380 motor mount adapter plates (they are expensive!) so I could mount the little 380 sized motors with 3mm shaft in place of the stock 540 3mm shaft motors.

    It runs well on 2 x 2s packs or 2 x 3s packs. Don't know the speed, probably about 20mph on 2s, which is right in line with the stock speed. It's setup as a sport/retrieval boat.

    One of the bushings at the prop shaft is a bit loose, there's a bit of rust and signs of wear all over. It is very used. Recently replaced the u-joints and pinion gears. The motors and electronics are like new.

    Comes with a separate BEC that's been water proofed and each ESC has been coated & sealed. ESC's are OPTO. The servo is a nice, fast Turnigy Bluebird water proof servo.

    Comes with the original Villain EX box and optional Traxxas 2.4ghz rx. (Add $15)

    $100 shipped to the US (cost is mainly for the electronics)

    Open to offers & trades.
    Attached Files
    FighterCatRacing Team CHING BLING - Ching Bling. Brilliant, Advanced Sparkle for your hull.
Working...