Neu 1515-2.5D/F

[baldwinc]

For sale- has 5mm shaft. This is the heli version w/built in fan, but don't see why it couldn't be used in a boat- motor is in excellent condition.

$150 via paypal shipped!

[tarnold69]

it dont really matter if people get inventive i got a 1521 1.5d f brand new in the box and wanted to put a water jacket on it so i taped off all the edges of the can so i did not gouge or scratch ,sevral layers and taped the shaft to that tight untill i get the shaft locked stationary with the can, then put it in my 18v dewalt chucked it up. then i took a file and turned it down to match the measurements of the 1518 green can water jacket ,the custom water jacket ose sells when i got colse final finish with with 600 grit the final 5 thousand,s , and it worked perfect it looks like it was made that way looks just like the green can but black . other option is to take it to a machine shop taken apart. but i did this at home in about an hour , hey when you get a good deal like this you make do i got the 1521 1.5d/f brand new for 150$ shipped to my front door , just an option for anyone who may turn there nose up at this motor because of the finned can dont pass on it fix it where there is a will there is a way , i have pics if anyone would like to see the motor and the can , and i am not trying to sell my motor its not for sale just trying to help.

[eboat]

Just one question

How are you going to get a boat type coupler on that geared shaft ???

[tarnold69]

the gear comes off with a set screw i doutp that it is pressed on if it is gear puller but i have sevral helicopters and i have never seen a press on on a motor just like you put your coupler on the gear comes off with a set screw the same way i dont know why he took a picture with the gear on he may have not had a allen wrench handy but anyway it comes right off

[eboat]

OK

just from the picture it looked like the teeth were cut right into the shaft

[tarnold69]

no they dont make them like that youwould never be able to change the pinion gear on your helicopter if it was made in to the shaft and that would suck , it definitally comes off with a set screw

[baldwinc]

Yup- remove set screw, pull pinion off. I left it on for the pic because I also have it for sale on a few heli forums as well.

[baldwinc]

Bump!

[baldwinc]

Trades?

[baldwinc]

Bump!

[baldwinc]

Bump!!