Up for sale is a Mod and very fast SV27. The boat is a tank and is bullet proof. RTR just add radio and batts.
sold
* Two layers of 5 oz fiberglass added to hull bottom and sides.
* One layer of 5oz fiberglass added to hull deck and transom.
* All fiberglass flood chamber. Flood chamber works very well.
* Pink foam insulating cut to countours of bow for floatation and strengh.
* Two layers of 5oz fiberglass added to hatch.
* Floation foam is added to hatch.
* Bottom of hull is filled and sanded smooth ( blue printed).
* Hull is painted with rust-oleum #7592 gloss white that is baked on for a tough
finish and is easy to touch up if needed. The hatch is factory paint.
* Custom made AL motor mount that runs down the keel for added strengh.
* The motor is mounted very low in hull for better COG and a very straight drive
line.
* Very strong .098 piano wire drive.
* Rudder is upgraded to one that has cooling hole on prop side for better water
flow.
* Rudder has extra Al support braces for add strength. The speed this boat is
capable of the rudder needs extra support.
* Strong 8xl with new bearings.
* Thrust bearing.
* Himodel 200a esc w/bec that is water cooled and is seeled in jb weld for water
proofing. (Comes with program instructions.)
* Al Steering srvo bracket.
* B&S parther SS 220 prop.
sold
* Two layers of 5 oz fiberglass added to hull bottom and sides.
* One layer of 5oz fiberglass added to hull deck and transom.
* All fiberglass flood chamber. Flood chamber works very well.
* Pink foam insulating cut to countours of bow for floatation and strengh.
* Two layers of 5oz fiberglass added to hatch.
* Floation foam is added to hatch.
* Bottom of hull is filled and sanded smooth ( blue printed).
* Hull is painted with rust-oleum #7592 gloss white that is baked on for a tough
finish and is easy to touch up if needed. The hatch is factory paint.
* Custom made AL motor mount that runs down the keel for added strengh.
* The motor is mounted very low in hull for better COG and a very straight drive
line.
* Very strong .098 piano wire drive.
* Rudder is upgraded to one that has cooling hole on prop side for better water
flow.
* Rudder has extra Al support braces for add strength. The speed this boat is
capable of the rudder needs extra support.
* Strong 8xl with new bearings.
* Thrust bearing.
* Himodel 200a esc w/bec that is water cooled and is seeled in jb weld for water
proofing. (Comes with program instructions.)
* Al Steering srvo bracket.
* B&S parther SS 220 prop.
Comment