Page error. Please use our search bar to find what you’re looking for.
Replaceing the antenna is a so so easy job.
STEP 1:
Purchase antenna
STEP 2:
Take the antenna mount and look at the bottom
There should be 2 clips that secure the bendy section in place
Get a drill bit to drill out those 2 clips
Drill them out, but be careful. Only drill out 1/8" to 1/4"
Then grab 1 or 2 flat head screw drivers and poke the bendy arm out of the mount.
STEP 3:
Snap the new antenna into place by pushing it into the mount.
STEP 4:
Take apart the transmitter and remove the old antenna wire
Then insert the new wire and connect it. It might be a little tough.
STEP 5:
Put it back together and mount the antenna on the top.
Comment