delta 26" carbon fiber reinforced artr

[Chuck E Cheese]

SOLD
this is a delta force 26" copy reinforced with carbon fiber, complete with speedmaster hardware. the sale includes: Hull, speedmaster stinger strut, speedmaster mini rudder, metal gear servo & mount, trim tabs, turn fin, etti 540 motor mount, water outlet and .187 flex cable with bearing, drive dog & nut. there is scratches on the cowl from fliping but otherwise hull is in great shape, some small scratches on bottom. it has no cracks or repairs and no leaks or other damage. overall condition is good, the scratches on the hatch happened the first time i ran it. this hull has gone 55mph on a 1515 1y/442 and runs right at 46-48mph on feigao 8xl. i also run this same hull on UL-1 and Super-V motor/esc's and it is a great boat. i have had 5 of these.
$140 as listed shipped USPS priority to US mainland.

$240 RTR with feigao 8xl with coupler/water jacket and turnigy 120 ESC and x442. requires reciever and lipo's only. esc brand new and motor used about 6 times.

first to say they want it in the forum and send paypal to [email protected] gets it

[johnf]

I'm interested, can you pm me some close ups of what you would consider any blemishes on the hull.

[Chuck E Cheese]

i checked it over good. the only "blemishes" are the scratches on the hatch shown above. the small scratches on the bottom are hairline and didnt show up in any of the pictures i tried to take. there are 3 verry minor hairline scratches on the bottom gel coat. they are really just enough to take off the shine.

[Chuck E Cheese]

theese are not actual pictures of the motor/coupler/esc for the 8xl combo but this is what is included. with this comes motor/esc/cooling jacket/coupler and x437-3 prop. all that would be needed to run would be lipos and reciever/transmitter. i will install the motor and esc if desired but would rather ship it in seprate packages and have you install it. i was using turnigy 4s 3600 30c x 2 in parallel but could also use 2s 5000 20c+ in series.

the motor has been used about 8-10 batteries in a UL-1 hydro, the esc is brand new in the package and would require connectors installed. the motor has male 5.5mm connectors. i could install them on the esc if wanted. i recomend 5.5mm on the battery side as well.

[fqdawld]

hey get kamaaina rate? lol how much shipped to the bigisland pm please thanks

[Chuck E Cheese]

shipping to big island is $12 no need priority so i would make it kamaaina $180 shipped complete or $100 hull and hardware.

if not kamaaina (or dont even know what that is) DONT BOTHER ASKING FOR THAT DEAL! reduced prices for you listed below..

anywhere else in the US $95 hull and hardware plus actual shipping

examples of actual shipping to:
CA 91360 - priority $40, parcel post $22
FL 32099 - priority $40, parcel post $22

i think it is the same anywhere in the US, be carefull because shipping from hawaii parcel post at times can take 3-5 weeks.

[BakedMopar]

Wow dude that's a sweet deal.

[BakedMopar]

Fqdawld wants it he should be sending you a pm. I beleive he wants it complete.

Thanks,
George

[fqdawld]

ill take it im gonna send the pay pal right now $180 thanks

[fqdawld]

payment sent and pm sent

[Chuck E Cheese]

this is pictures of the actual stuff included in the sale

[fqdawld]

right on chuck E cheese mark dis bugga sold...... mahalo and merry x-mas

[Chuck E Cheese]

shipped today

[fqdawld]

chuck thanks for everything this boat rips...... thanks!!!!

[Chuck E Cheese]

i sent a prop out yesterday