Glad you had good day. I was at the pond for about 5 hours today. Had a good time but was chasing some gremlins. Mikeys new boat was the first one in. I was surprised how the little Titan 29 handled the chop. I only have her set up for around 40 mph but other than some prop steer from turning the M445 with the 10XL, she did good. Then we had problems with Johns boat but isolated the problem to a bad crystal. She ran great with the new M445 you cut for me. Next came the gas Sniper. I couldnt have dreamed to have nailed the set up as well as I did. She screamed across the water and turned on a time without loosing any power in the turns. She ran just a touch wet in the calm water with just a hint of bow steer. Then on the second run, bad news. I was bringing her in and the throttle cut off was not working. I brough her back around and tried turning off the transmitter to engage the failsafe. Didnt work. I did a rookie move and paniced a bit running her onto the rocks. Turns out when the motor warmed up, the carb butterfly shaft was binding a little and would not let her down past quarter throttle. Oh well. Its a race boat and now it looks the part. Scratched the hull up pretty bad, kick back bolt on the rudder did it's job. Bent some of the hardware on the strut. Worst of all doinked up my $70, X472 prop.
Threw the Titan 33 in with the new CC240 controller. She ran like she only had 3S packs in her. I will check the settings and connections and see what the problem is.
Have a good week!

Have a good week!
Comment