One "CRANKIN" Fast Sniper

[ksm2001]

Here are the nitro lookie loos

Ken

[Brod]

Great video,very fast very stable and VERY nice.
Can i ask you Peter,what was your final cofg % on the boat?.
Did you offset the stinger too?
thanks.
Brod..

[Punisher 67]

Hello Brod

thanks for the comments , Stringer and tabs are all at neutral or zero and the CG I am not a 100% sure I think at 30%

I will later today throw everything in and measure that for you so check back in a few hours , kind of curious myself now...........

[Flying Scotsman]

Here are the nitro lookie loos

Ken

Ken, I may have to take a trip to you know where and meet up with your wonderful creators of great boats and a sense of humour.

Douggie

[Punisher 67]

Oh my god ken my old cheerleaders when will they be there......

Brod the CG is at 31.5% , it balances at 14.5 inches from the rear and total boat length is 44.5 inches

[Brod]

Thanks very much Peter.
Quite surprised at no offset on the stinger,i have the 47" version,(allbeit a copy) and mine needs at least 6mm offset to stop torque roll.
I also have the 33" and the 29" version which needs none.

http://stores.shop.ebay.co.uk/Promise-Hobby__W0QQ_armrsZ1QQ_fsubZ14959099

My 47 also runs very flighty at less than 34% but the 33 and the 29 runs happy at 30%.
All stingers/struts flat.
My son runs this 45" version and cofg is happy at 29%.with no stinger offset.

http://cgi.ebay.co.uk/45-Fiber-glass-deep-V-hull-for-RC-boat-white-rc-boat_W0QQitemZ300300340478QQcmdZViewItemQQptZRadio_Control_Parts_Accessories?hash=item45eb4b8cfe&_trksid=p4634.c0.m14.l1262&_trkparms=%7C301%3A0%7C293%3A1%7C294%3A30

I suppose theres no prediction with these hull setups, its a suck it and see thing.
thanks again..
Brod..

[sailr]

Where are the Sniper hulls available. I've googled and lost! haha

[ksm2001]

Steve has them here, http://www.offshoreelectrics.com/pro...prod=df-sniper

Ken