King Of Shaves C1 Brushless!

[Chris Nicastro]

The ESC Y harness has one of the positive leads cut so the BEC from one ESC is used only. You can trouble shoot an ESC issue by swapping over the leads one at a time and arming them with the lead that is not clipped.

[NitroVal]

Aha, that explains it..

[Bob Bighinatti]

I didn't either. Also didn't get an antenna cap, but I had a spare.

The included allen wrench was not the correct size (slightly too small) and didn't work, but I had one that did.

These are all no big deal to me... but the motor failure is a show stopper.

Still on motor yet
Bob Big

[Chris Nicastro]

We are currently out of stock. When they arrive in stock one will be shipped directly to you.

[NitroVal]

Heres a pic of the first float test and she seems to wade water pretty well. I guess I will not need extra flotation after all. I did a crewd weighing of boat and shes porkin' out at about 7lbs

[Brushless55]

I don't think adding extra flotation would make the boat ride higher, just help keep it from sinking if she flips on her lid..

big bats, looks good.

[Drag Boat Bob]

We are currently out of stock. When they arrive in stock one will be shipped directly to you.

I really thought that I was next in line for a new motor.

Are there others that also need one???

[Akoni]

To float it higher, you'd need to displace more water. Putting more "flotation" in the existing hull form would, albeit insignificantly, make it sit lower in the water. However, if it were to fill with water then the internal flotation keeps it from slipping under.

What batteries are those? What other mods you got going on in there NV?

I'm running mine stock on some 3s packs that are too small capacity-wise. Waiting on some bigger packs to show. I really dig this boat!

[Brushless55]

We are currently out of stock. When they arrive in stock one will be shipped directly to you.

I sure hope I don't have motor issues with mine!
looks like I could be out a couple weeks or more of running this boat..
maybe I'll just sell the stockers and get some NEUs

[Steven Vaccaro]

We are currently out of stock. When they arrive in stock one will be shipped directly to you.

Chris don't take this the wrong way, but this happens often with all manufacturers, they release a hobby rc rtr product and then don't have the parts to support it. Can you shed some light on why this happens? For example, I bought my kids Team Associated Mini's a couple of Christmas's ago, they both broken that day, and it was a month before Associated released the parts.

[NitroVal]

The issue with new releases is its really a crap shoot. You dont want to over-produce something and end up having it flop on the market. Then your stuck with product that doesnt move. Im sure they didnt foresee this motor issue. They probably only have enough motors to put into the production boats.

As for my boat, I guess my fingers were typing a different story from my mind. I was going to add the extra foam in the event that the boat sat too low in the water to prevent it from actually drowning if I did have a catastrophic accident. I was worried I would have to launch the boat at full throttle so it started on plane, but now that I see how well it floats, I'm relived I wont have to. I may still add some expandable foam for added insurance though.
The batteries are Neu 5s 30c 4100mah packs I bought from a fellow OSE member. The ESCs are Etti Race 150s with cap boards, also bought from a fellow OSE member. For now, the stock motors are gonna be used since they will run right under 60k. When they fry, some Neu units are replacing them

[Drag Boat Bob]

The issue with new releases is its really a crap shoot. You dont want to over-produce something and end up having it flop on the market. Then your stuck with product that doesnt move. Im sure they didnt foresee this motor issue. They probably only have enough motors to put into the production boats.

As for my boat, I guess my fingers were typing a different story from my mind. I was going to add the extra foam in the event that the boat sat too low in the water to prevent it from actually drowning if I did have a catastrophic accident. I was worried I would have to launch the boat at full throttle so it started on plane, but now that I see how well it floats, I'm relived I wont have to. I may still add some expandable foam for added insurance though.
The batteries are Neu 5s 30c 4100mah packs I bought from a fellow OSE member. The ESCs are Etti Race 150s with cap boards, also bought from a fellow OSE member. For now, the stock motors are gonna be used since they will run right under 60k. When they fry, some Neu units are replacing them

Remember the death of the Wicked Witch of the West?

I think those motors will have the same fate...

Try and get some video if you can... this is going to be good.

[Chris Nicastro]

Of all the boats we have sold there have been two reported cases of motor failures to my knowledge. The reason our motor vendor has not delivered our motors yet is unclear to me right now but they have had to fill our order for many motors included in the production of this boat and then they have to catch up to the replacement part order.
The last word I got is that they are on the water so we expect them soon.

[Chris Nicastro]

VENOM GROUP
Available October, Venom™ Pro Machined and Cast Aluminum Props for the EKOS
Designed for those looking to get the most out of their Venom Electric King of Shaves R/C Boat,
Venom is proud to release their new line of Aluminum Props. For the ultimate setup, the Pro
Machined props are precision CNC machined in aluminum and then anodized in an attractive red.
For those on more of a budget but still looking for the strength and durability of an aluminum prop
the cast aluminum props are a perfect option.

Part # Description *Retail Price
VEN-1989 Pro Machined Prop 32mm 1.4P RT- EKOS $49.99
VEN-1990 Pro Machined Prop 32mm 1.4P LT- EKOS $49.99
VEN-1991 Pro Machined Prop 36mm 1.4P RT- EKOS $49.99
VEN-1992 Pro Machined Prop 36mm 1.4P LT- EKOS $49.99
VEN-1993 Alum Prop 32mm 1.4P RT - EKOS $21.99
VEN-1994 Alum Prop 32mm 1.4P LT - EKOS $21.99
VEN-1995 Alum Prop 36mm 1.4P RT - EKOS $21.99
VEN-1996 Alum Prop 36mm 1.4P LT - EKOS $21.99

*Note: Retail Prices are for US Customers Only
Venom products can be found at hobby shops throughout the U.S. and over forty-five countries worldwide.
For more information, visit Venom online at: www.venom-group.com.
For more information contact Venom directly at 800-705-0620 or email us at [email protected].

[RCprince]

You guys really have a winner here. But those prices are a lil' steep, don't you think?