King Of Shaves C1 Brushless!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Steven Vaccaro
    Administrator
    • Apr 2007
    • 8720

    #166
    I haven't taken one apart yet, but from the looks of it, they are running on a gear box. That makes all the difference.
    Steven Vaccaro

    Where Racing on a Budget is a Reality!

    Comment

    • 6S HYDRO
      Fast Electric Addict!
      • Mar 2009
      • 1320

      #167
      No gear box- that is just the motor withouth the watercooler portion. They are direct drive

      Comment

      • Steven Vaccaro
        Administrator
        • Apr 2007
        • 8720

        #168
        Originally posted by 6S HYDRO
        No gear box- that is just the motor withouth the watercooler portion. They are direct drive
        Interesting. Can't wait to see two things. 1st a motor without the sleeve. 2nd the longevity of these motors on 4s.
        Steven Vaccaro

        Where Racing on a Budget is a Reality!

        Comment

        • RCprince
          Fast Electric Addict!
          • Jul 2007
          • 1637

          #169
          Originally posted by Steven Vaccaro
          Interesting. Can't wait to see two things. 1st a motor without the sleeve. 2nd the longevity of these motors on 4s.
          Steve would the Neu 1100 be an adequate upgrade, possibly the 1115 series. Due to space constraints.
          Last edited by RCprince; 08-31-2009, 05:05 PM. Reason: upgrade
          Samuel Johnson - “An injustice anywhere is an injustice everywhere.” William Cooper "listen to everything, read everything, and believe nothing unless you can prove it in your own research!"

          Comment

          • Steven Vaccaro
            Administrator
            • Apr 2007
            • 8720

            #170
            Power wise, I think so. They pack quite a punch. But they also pack quite a punch to the wallet.
            Steven Vaccaro

            Where Racing on a Budget is a Reality!

            Comment

            • RCprince
              Fast Electric Addict!
              • Jul 2007
              • 1637

              #171
              I was also looking at these http://www.lightflightrc.com/HTML/pr...RC-28-58-1.htm
              Samuel Johnson - “An injustice anywhere is an injustice everywhere.” William Cooper "listen to everything, read everything, and believe nothing unless you can prove it in your own research!"

              Comment

              • nomobux
                Senior Member
                • Apr 2007
                • 165

                #172
                Originally posted by NitroVal
                I just got back from the lake to try my prop mods. I filed down all the casting flash left over from the factory and polished the props in a tumbler last night. It seemed to have worked. New top speed was measured at 35.0mph in the same conditions (less wind) on 3S. I think there may be more left in it with some ESC programming (max out the timing perhaps?) and maybe some prop angle adjustments to reach that elusive claimed 40mph out of the box number.
                I don't have the box in front of me at the moment, but I believe the 40 out of the box has a smallish print notation down below that says on 4S lipo.
                Last edited by nomobux; 09-01-2009, 08:26 AM.

                Comment

                • Drag Boat Bob
                  Senior Member
                  • Apr 2009
                  • 304

                  #173
                  The box states:

                  "40mph/64kph speeds require 11.1v lipo battery packs"

                  Hopefully my batteries will arrive today...

                  Comment

                  • NitroVal
                    Senior Member
                    • Jun 2009
                    • 423

                    #174
                    Yup, it say only 3S batteries.
                    I ran again today with the x442 props. Pretty impressive, 8.6mph gain. New best 43.6mph with nothing but props. They may be a little big though. I think the amp draw would be excessive with 4S batteries. The motors and ESC were warm, but the motor wires were hot. Im gonna run again tomorrow and take my temp gun to make sure. Anyone know how hot is too hot?
                    This helps my decide that the OSE calculator is pretty dead on, even though its for single motors and this boat runs dual motors. The calculator put my top speed at 42mph
                    The RTR Nightmare- Electric King of Shaves
                    Now with 540s- 62mph
                    New setup- Etti 150A's, Turnigy 2600s, 5S, X442s and a whole lot of cooling hoses

                    Comment

                    • Brushless55
                      Creator
                      • Oct 2008
                      • 9488

                      #175
                      Originally posted by Drag Boat Bob
                      The box states:

                      "40mph/64kph speeds require 11.1v lipo battery packs"

                      Hopefully my batteries will arrive today...
                      That's what I was thinkin..
                      .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

                      Comment

                      • NitroVal
                        Senior Member
                        • Jun 2009
                        • 423

                        #176
                        Another vid from yesterday. Bare with me as I was driving with one hand, filming with the other, and trying to avoid trees and rocks from our constantly dropping lake levels

                        Loving this boat more and more everyday
                        The RTR Nightmare- Electric King of Shaves
                        Now with 540s- 62mph
                        New setup- Etti 150A's, Turnigy 2600s, 5S, X442s and a whole lot of cooling hoses

                        Comment

                        • Doby
                          KANADA RULES!
                          • Apr 2007
                          • 7280

                          #177
                          Nice obstical course you have set up!
                          Grand River Marine Modellers
                          https://www.facebook.com/search/top/...ne%20modellers

                          Comment

                          • nomobux
                            Senior Member
                            • Apr 2007
                            • 165

                            #178
                            Yes ... I woulda crashed for sure.

                            Comment

                            • NitroVal
                              Senior Member
                              • Jun 2009
                              • 423

                              #179
                              Yea Im starting to get a little worried about my spot. Its a closed boat ramp due to the water level being too low, but the lake is dropping a foot every week, so I dont know what is lying just beneath the surface that I cant see. I cant imagine hitting a rock at 40mph
                              The RTR Nightmare- Electric King of Shaves
                              Now with 540s- 62mph
                              New setup- Etti 150A's, Turnigy 2600s, 5S, X442s and a whole lot of cooling hoses

                              Comment

                              • 6S HYDRO
                                Fast Electric Addict!
                                • Mar 2009
                                • 1320

                                #180
                                dont

                                Comment

                                Working...