Little Twin G

[srislash]

Great job shawn.. the ride pads look sweet should work great..

Thanks buddy,I'm just charging along with this one.And enjoying it!! Got the ESC mount made and the hull bottom painted yesterday.Along with visiting all the family. A very successful day. I'll post pics afterwork.


Hey Carl,,,I do have a pair of Castle 3434 outrunners and SK 80 HV's that will fit in here too.

[srislash]

Here is yesterdays work.I still need to wetsand the ride pads and coat them again.I like a heavy coat here for scuffing later.



And here is what I came up with for the ESC's,rubber foam-ESC-rubber foam-ESC-Carbon Fibre cap held down with Chicago Bolts.

[Make-a-Wake]

Looking very nice!! I like your tapered edges................have they been tested by others...............do they work as intended?

What a cool ESC mount as well!

[srislash]

Looking very nice!! I like your tapered edges................have they been tested by others...............do they work as intended?

What a cool ESC mount as well!

Thanks Carl,I'm not sure about the edges this way.But it is something I would've liked to have done to my Shocker.Should be able to let you know soon though,WE ARE GETTING CLOSE!!

[tagasagwan]

looking good Shawn! I love the esc mount. clean build. keep it up bud!

[HYDROJERRY]

Aww,,, im lovin the esc mount very cool and good idea,, the ride pads look very clean,, cant wait to see how it handles

[srislash]

Just had to put this # somewhere. Bare hull with hatch weighs in at 2lbs 11oz's.

So everthing is figured out and she is now disassembled,Going to clear the inside(for conductivity reasons),put a few sponser decals on that I have and possibly clear over it? Anybody have any suggestions here.This is factory paint.Rubbing alcohol?Light sand?Using U-pol clear#1.

[HYDROJERRY]

I actaully do a light wet sand, do a light wash with dish soap blow off with my aircompressor and spray it but i use rustolium clear enamel paint not U-POL,,,

[Mike Caruso]

I got this one off Steve here(OSE). It is the center mount one.http://www.offshoreelectrics.com/pro...prod=ose-80057

Nice part the more I watch your build the more I want to build one. Ha

[srislash]

I awoke real early this morning to the thought that I must put a CF stringer in the center of the bow to strengthen the deck.This will cut out the flexing in a blowover and remedy any more seam cracks.The deck is flimsy and if it gets forced in the sides flex and crack.Hats off to whomever brought this up on this forum.Clear today then final assembly

[HYDROJERRY]

'' Get-R-Done ''

[Make-a-Wake]

I've seen several of these twin Geico's on Youtube, they look great at high speed and sound wicked with the twins.

[srislash]

I never thought to look them up,I've only seen Scott's.

[HYDROJERRY]

Better get crackin shawn!!! Now with the big cat build too youll have your hands full bud, well after your trip!!

[srislash]

Better get crackin shawn!!! Now with the big cat build too youll have your hands full bud, well after your trip!!

I'm doing final right now Jerry.Hoping for maiden today.Clear is done