"that" miss geico

[masonis1]

So on my turning 2700 on 4s I will be hitting 39000 rpm. That's SAW rpm I hear. Hah maybe a once up and down the lake to test. Also the guy doing my prop work said he can add some pitch. Don't know how much.can be added if any but I hope it can be up by the 1.6 instead of 1.3 but doubt it. Hah

Sent from my SPH-D700 using Tapatalk 2

[LarrysDrifter]

Last thing you need is more pitch if using that motor on 4s.

[masonis1]

I don't plan on using this motor for long

Sent from my SPH-D700 using Tapatalk 2

[masonis1]

. third times a.charm

Sent from my SPH-D700 using Tapatalk 2

[masonis1]

Esc is wired up. Everything is ready to.go... Except the hull.

Sent from my SPH-D700 using Tapatalk 2

[masonis1]

After I look at this truck tonight for my first car I will said the boat down and prep for paint. I will try getting least the base color. Green. Down after primer before I go away for camp.

Sent from my SPH-D700 using Tapatalk 2

[masonis1]

So re sanded the ride pads. Cleaned and wiped down the boat. Ill try getting some paint and primer tomorrow. Ready for primer. K also.need more sand paper.

Sent from my SPH-D700 using Tapatalk 2

[masonis1]

Sent from my SPH-D700 using Tapatalk 2

[masonis1]

So went to got test esc. Well plugged in and well. The receiver is blinking red hut the bec and etc light up and tone up fine which is good. The rx just isn't binding.with the tr. I.guess ill try rebinding tonight if can find out how.

Sent from my SPH-D700 using Tapatalk 2

[masonis1]

So got the paint. Almost the exact same colors. Excited. Ill primer it tonight.

Sent from my SPH-D700 using Tapatalk 2

[masonis1]

Sent from my SPH-D700 using Tapatalk 2

[masonis1]

Ran the first boat today head to head against my cousins brushless blast. Gotta say my.other.boat bounces a LOT. Debt know how tk.chAnge it

Sent from my SPH-D700 using Tapatalk 2

[masonis1]

Green is finished. Dry for 5 days while I'm at camp. Then I will tape it up and paint the blue.

Sent from my SPH-D700 using Tapatalk 2

[masonis1]

Started tears and i will most likely be putting blue on tomorrow. Looking good. One more some on tears to do and its ready.

Sent from my SPH-D700 using Tapatalk 2

[masonis1]

Sent from my SPH-D700 using Tapatalk 2