Your MG that started off as a hull

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • skyman
    Senior Member
    • May 2012
    • 290

    #2371
    Originally posted by HYDROJERRY
    88 trying to hit 90,,,crazzy!!!! So i feel leftout,, how dose everyone get the stuff on the bottum of they're posts, like what boats they have and such????
    it's your sig under settings at the top right of the page
    Axial Yeti XL - Traxxas Slash 4x4 (x2) - Losi Mini 8ight - Tacon Soar Buggy - Blade 120SR - Miss Geico 29 (hull + parts)

    Comment

    • skyman
      Senior Member
      • May 2012
      • 290

      #2372
      Originally posted by tagasagwan
      Hey Ed! I found the videos of Jay Turner's Skunkworks Gen2 Cat. It's the fastest I know so far of the 12 Skunks! It hit 84.4mph
      that's unbelievable!! however, mine will be even faster 100+ mph
      Axial Yeti XL - Traxxas Slash 4x4 (x2) - Losi Mini 8ight - Tacon Soar Buggy - Blade 120SR - Miss Geico 29 (hull + parts)

      Comment

      • skyman
        Senior Member
        • May 2012
        • 290

        #2373
        Originally posted by macdon
        Here's a frankenstein setup on my Xray!

        I scrounged around my electric stuff and found a Hobbico servo that used to be in a aquacraft reef racer that my son busted up months ago, I found a 2445 3200kv motor that used to be in my mini deep vee which I took off the water cooling jacket and grounded the 3mm motor shaft to 2mm to fit the pinion of the xray, got a 2s LiFe tx battery for power as it is the only size battery I have that would fit inside the chassis and got a T60a esc that I used in a mini deep vee.
        Since it was just for testing purposes, I didnt use double sided tape - just routed the wire anywhere just so they kinda stayed there.

        Not bad! Having given up rc cars more than 20yrs ago, this mini seems a hoot! I was even surprised how fast these little boogers go! Many times did I see both my rx and esc being dragged on the floor! hahahaha!
        While I didnt do any fast straight runs, Im wondering how come motors for these 1:18 are listed at 6000kv - 7000kv whereas I already found the 3200kv fast enough? Am I missing something here or im just getting old?
        They're fast & very nimble - you gotta be quick on your fingers and a small input on the wheel could literally turn them on a dime!
        Im still deliberating though if I would buy the appropriate combo for this mini.
        hey, at least u got it to work, that's something... but get a good combo for it and enjoy it. a good diversion from running boats all the time.
        Axial Yeti XL - Traxxas Slash 4x4 (x2) - Losi Mini 8ight - Tacon Soar Buggy - Blade 120SR - Miss Geico 29 (hull + parts)

        Comment

        • tagasagwan
          Molino Boater!!!
          • Jun 2008
          • 990

          #2374
          Originally posted by Fluid
          Actually the fastest pass on 6S was 88.9 mph. I was trying hard for a 90 mph pass but just couldn't get there....that weekend.



          .
          88.9mph wow! Oh Jay, is that the same skunk that held the p and q class records?
          My Aquacraft SV27's old Video: http://www.youtube.com/watch?v=VoTm4Btz41Q
          MHZ Micro Iceberg, Skunksworks Gen2 Cat twin, Aquacraft SV27, SM29 1515 sold.

          Comment

          • HYDROJERRY
            Fast Electric Addict!
            • Jan 2010
            • 2503

            #2375
            Cool Ed thanks for the info!!
            Very cool Mac, man it looks tight in that little guy!! I say run it.. Check this out this is the one i was making all aluminum!! sold it afew years ago.. Forgive me if ive already shown it..
            Attached Files

            Comment

            • skyman
              Senior Member
              • May 2012
              • 290

              #2376
              Prop question

              ose seems to have sharpened & balanced props, should i get these? most of them are out of stock
              Axial Yeti XL - Traxxas Slash 4x4 (x2) - Losi Mini 8ight - Tacon Soar Buggy - Blade 120SR - Miss Geico 29 (hull + parts)

              Comment

              • skyman
                Senior Member
                • May 2012
                • 290

                #2377
                Originally posted by HYDROJERRY
                Cool Ed thanks for the info!!
                Very cool Mac, man it looks tight in that little guy!! I say run it.. Check this out this is the one i was making all aluminum!! sold it afew years ago.. Forgive me if ive already shown it..
                that's a mini lst? it's beautiful!!!!
                Axial Yeti XL - Traxxas Slash 4x4 (x2) - Losi Mini 8ight - Tacon Soar Buggy - Blade 120SR - Miss Geico 29 (hull + parts)

                Comment

                • HYDROJERRY
                  Fast Electric Addict!
                  • Jan 2010
                  • 2503

                  #2378
                  Thanks bud,yep mini LST and yes i would get them already S/B/P it is very hard to do it your self, i think in the end youd rather payfor it,, i dont no who dose it for the best price but seeing everythings out of stock id recomend either look in the section, i think its called products and services buy poeple or something like that,, ive had two done buy randyatBBY and they where ok but ICEMAN has done the best ones for me!!!

                  Comment

                  • skyman
                    Senior Member
                    • May 2012
                    • 290

                    #2379
                    Originally posted by HYDROJERRY
                    Thanks bud,yep mini LST and yes i would get them already S/B/P it is very hard to do it your self, i think in the end youd rather payfor it,, i dont no who dose it for the best price but seeing everythings out of stock id recomend either look in the section, i think its called products and services buy poeple or something like that,, ive had two done buy randyatBBY and they where ok but ICEMAN has done the best ones for me!!!
                    are these users here on ose?
                    Axial Yeti XL - Traxxas Slash 4x4 (x2) - Losi Mini 8ight - Tacon Soar Buggy - Blade 120SR - Miss Geico 29 (hull + parts)

                    Comment

                    • HYDROJERRY
                      Fast Electric Addict!
                      • Jan 2010
                      • 2503

                      #2380
                      Yep, both are on here..

                      Comment

                      • CHIEFY_44
                        Senior Member
                        • Nov 2010
                        • 254

                        #2381
                        I can recommend dasboata for prop work I have lots of props from him and never been dissatisfied with them and he is reasonable on price. His web site is www.dasboata.com and he does post on here aswell, he can do whatever you need done to the props. Take a look at his web site.
                        Socal Fe member, miss gieco castle 1515 1y t-180, blackjack29 stock,insane FE30 p sport castle 1515 1y t-180, insane FE30 p spec ul-1 motor t-120, insane 34"mono neu 1521 1.5d t-180

                        Comment

                        • skyman
                          Senior Member
                          • May 2012
                          • 290

                          #2382
                          Originally posted by CHIEFY_44
                          I can recommend dasboata for prop work I have lots of props from him and never been dissatisfied with them and he is reasonable on price. His web site is www.dasboata.com and he does post on here aswell, he can do whatever you need done to the props. Take a look at his web site.
                          thanks buddy! what is the difference between the abc & octura props?
                          Axial Yeti XL - Traxxas Slash 4x4 (x2) - Losi Mini 8ight - Tacon Soar Buggy - Blade 120SR - Miss Geico 29 (hull + parts)

                          Comment

                          • CHIEFY_44
                            Senior Member
                            • Nov 2010
                            • 254

                            #2383
                            I was there when Jay was doing them passes and it was awesome to watch him working on his boat and seeing the boat run was mind boggling, and Jay if you read this I'm the crazy English guy that loaned you the ezup, it was a pleasure to meet you my friend and hope to see you again soon, gd health to you and ur family, if you head this way again give me a shout and maybe I can help out again.
                            Socal Fe member, miss gieco castle 1515 1y t-180, blackjack29 stock,insane FE30 p sport castle 1515 1y t-180, insane FE30 p spec ul-1 motor t-120, insane 34"mono neu 1521 1.5d t-180

                            Comment

                            • skyman
                              Senior Member
                              • May 2012
                              • 290

                              #2384
                              OSE has the octura x645 s/b in stock, x445 & m645 are out of stock... i sent a notify by email
                              Axial Yeti XL - Traxxas Slash 4x4 (x2) - Losi Mini 8ight - Tacon Soar Buggy - Blade 120SR - Miss Geico 29 (hull + parts)

                              Comment

                              • CHIEFY_44
                                Senior Member
                                • Nov 2010
                                • 254

                                #2385
                                Most of my props are octura with some Prather ones thrown in as to ABC props I only have 1 that's a H5 for my p-sport hydro, I don't know what ur specs ate for ur MG but with a 1515-1Y and a T-180 I run a M445/M545 or a X645 and it runs great.
                                Socal Fe member, miss gieco castle 1515 1y t-180, blackjack29 stock,insane FE30 p sport castle 1515 1y t-180, insane FE30 p spec ul-1 motor t-120, insane 34"mono neu 1521 1.5d t-180

                                Comment

                                Working...