Out of luck so far :S

[eylemkaan]

some strands yepp, very new at this nautical jargon sorry....

[G-UNIT]

To see some pics of my set up look in the members list it shows the speedmaster hardware on my boat, no pics of the inside yet.
your best bet is to cut a new flex shaft but before you do solder the area your going to cut first.

[eylemkaan]

flex shaft is on the way from ebay, I'll use this one anyhow (if no warnings from anyone on safety???)

see the whole thing finished up:

interior


bottoms up


another one

[G-UNIT]

Looks ok, yeh lose the u-joint flex shaft, it will brake in time.

[eylemkaan]

any other comments? all are welcome before I start cutting the fins :)

btw most probably will be using the boat in the weekend, if not sooner, will let you know of how it rolls!

[eylemkaan]

damn! strong wind shuffling waters all around sea/lake through the whole weekend

still outta luck :)

[blackcat26]

I agree with G-unit the U-joint is the boats weakest link for sure. Your strut looks a little deep also. I would start with the bottom of it level with the bottom of the sponsons.