Supervee rebuild

[Jeff Wohlt]

You need to wait a week before polishing or waxing. If you clear coated then let it cure. Then polish and then wax.

If no clear then certainly wait it out so it fully cures. Then use ultra fine polish (3M) and then wax.

[BIGDG357]

Thanks Jeff, that's why I hang around here.

[tiqueman]

Where do people get the carbon fiber for the inside of the boat from?

I just got a partial roll, a little less than a yard of raw CF cloth, 2X2 twill, from Fiberglast.com If you sign up with them, they often run some decent deals that they will send to you via email. Ive also ordered a plate at one time from dragonplate.com At teh time they were running some good deals on pre-finished plates for very reasonable costs...

[6S HYDRO]

TRY THIS PLACE, THEY GOT SOME COOL STUFF, HOLOGRAPHIC CARBON....

http://compositeenvisions.com/raw-fabric-cloth-2/colored-carbon-fiber-kevlar-100/blue-carbon-fiber-kevlar-fabric-2x2-twill-50-3k-5-5oz-377.html

[6S HYDRO]

Good prices too

[BIGDG357]

Finally got the carbon fiber down with the stringers resined in

[z400]

Looks very good!!!

[Christaphason]

Came out VERY nice

[BIGDG357]

This is the latest on my supervee rebuild I've been kinda busy so this is taking a while.The decal on the deck is not what I thought it was going to look like so it is temporary and i also polished the hardware. Now I just need to get the electronics together and I'll be ready to go, going for the 60 MPH mark.

[sunsation288]

Congrat on the job , very well done , what is the tube left to the strut ?
many thanks

[BIGDG357]

Congrat on the job , very well done , what is the tube left to the strut ?
many thanks

the tube is on the trim tab adjusters it is a 2nd water pick-up. I use this one on the ESC as this one moves more water than the stock these are from Kintec racing they are really nice

[6S HYDRO]

i think he means the autobailer

[sunsation288]

Many thanks for the fast respond , but i need to know this one ....

[6S HYDRO]

its an autobailer

[sunsation288]

its an autobailer

Ok thanks , i see ...but you use that with a electric ?