Revolt finally kicks a$$

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Heaving Earth
    Banned
    • Jun 2012
    • 1877

    #16
    No we're running seaking escs

    Comment

    • MAMBA2200
      I need a scooby snack
      • Jul 2012
      • 1202

      #17
      Originally posted by Heaving Earth
      No we're running seaking escs
      Correct

      Sent from my FE Phone
      Im Only Responsible For What I Say Not For What You Understand

      Comment

      • TLeyde
        Member
        • Aug 2011
        • 88

        #18
        Thanks, didn't think you could adjust the stock.

        Comment

        • ChoppyOne
          Just Addicted !
          • Apr 2013
          • 121

          #19
          4S Or 6S looked good looked like a larger motor that stock............she's flying
          G1 Whip , Insane F1, FE VS1
          LSMBC Dist 7 Namba 1759

          Comment

          • metoo
            Member
            • May 2013
            • 32

            #20
            Seems this is a "thank you" thread for members that helped the OP with a problem. What was the problem? Looking at the OP's post history, I didn't see anything related to this thread.
            Revolt 30, Octura M545, Spectrum DX3S tx, ORX rx, Shaft from Kinetic...not on the water yet.

            Comment

            • Rumdog
              Fast Electric Addict!
              • Mar 2009
              • 6453

              #21
              Seems to me his LVC was kicking in prematurely. Turned it off, now it performs correctly.

              Comment

              • Heaving Earth
                Banned
                • Jun 2012
                • 1877

                #22
                I don't understand why turning off the lvc causes the cell counter to not count... Can someone clue me in why?

                Comment

                • Cooper
                  Fast Electric Addict!
                  • Jan 2011
                  • 1141

                  #23
                  Originally posted by Heaving Earth
                  I don't understand why turning off the lvc causes the cell counter to not count... Can someone clue me in why?
                  I believe it's the program, when low voltage cutoff is disengaged then the programming written does not need to proceed with sounding beeps to establish cell count. It is all relitive to the code. The beeps are to establish correct cell count. If no cell count is need no beeps are needed to establish what the cut off would be.

                  Comment

                  • Cooper
                    Fast Electric Addict!
                    • Jan 2011
                    • 1141

                    #24
                    Also think if you were using nicad packs- no lvc

                    Comment

                    • Heaving Earth
                      Banned
                      • Jun 2012
                      • 1877

                      #25
                      Ahhh.... That makes sense \m/ thanks!

                      Comment

                      Working...