ok people, this is how you get cooling tube back thru the hull

[dana]

so many people on here doing all sorts of stuff to get the cooling lines back thru the hull. heres a quick pic and how to do it. cut about 3 xtra inches of tube, now cut it to a long point, now you can feed the thinned end thru, pull it thru from the other side and cut it flush. simple

[scoota]

good idea ,thats what use to do, but i still like my idea with the copper tube thru the hull , that way you know this is no restrictions of water flow by the tight fit of the hose going thru the hull , each to there own ....

[Grimracer]

If you have to enlarge the hole a tick and cut a 60deg angle on the water line.. slip it thought and pull.. trim square..

Its allot like you are doing just not as drastic a angle on the line.. Good job!

Grim