Prop for Aquacraft Vegas Duece FE conv. 2200kv 6S

[dana]

I use mine on ul1. Many people have said this prop doesn't work, or the strut needs to be down, but mine runs with strut all the way up.
The main thing I think is balancing and sharpening this prop. The blades are thick and need to be thinned ALOT.
I spent a solid 3 hours of work on mine...,
Jonc, just make sure it's done well.... It takes a second, but when it hooks up hang on

[TheShaughnessy]

i got it because i read it is a good prop for the ul1. So i was thinking it would work great with the vegas. I didn't thin the blades at all, at least not with the intent of thinning them, just enough to sharpen and balance. I just didn't care for it.

I put a 42x55 on it today and it ran the best yet. A low lift propEagle tree, vegas rpm.jpgEagle tree, vegas temp,volt.jpgEagle tree, vegas, watts, amps.jpg