Venom P1 KOS or Pursuit?

[boatsrnew2me]

I am running on 6s only and the stock motor runs as fast as the hull wants to run. approx 45mph on 6s and she starts to walk, these hulls seem to have speed limitations you get to a point they start chine walking....watch all the videos on youtube of 6S runs yourself and make up your own mind

well i put lipo trays on both sides of the hull and run 2 -3s lipos . i have no chine walking and i am running above 50 mph .57.4 is my best so far .

heres a video of that run .

special treat if you watch until the end .

[MadProps]

[QUOTE=boatsrnew2me;699787]well i put lipo trays on both sides of the hull and run 2 -3s lipos . i have no chine walking and i am running above 50 mph .57.4 is my best so far .

you are running a leo 6S upgrade motor so its easier to add some trim tab to calm it down and still have speed
Im still running the stock motor to learn the boats setup and get the most out of it while stock.
I can get rid of the chine walk but suffer some speed loss, and maybe its the 1-2mm hook on each side of my hull at the transom, Ive seen posts where guys are asking about this and with the number of 6s videos of the pursuit chine walking maybe it is a hook issue

what prop are you running.....regardless good on you most videos show them bouncing all over like mine does

edit: I watched till the end and nice that you can make fun of yourself like that

[boatsrnew2me]

yes i am running a 4082x2 1600 kv leopard with a ose x645 prop . and yes i slipped on a mossy rock and fell in at the end...lol.luckily the s7 edge is somewhat waterproof.
i guess my lipo weight on both sides the hull helps keep it stable . i never tried the front lipo tray .i dont own a 6s lipo .never messed with the trim tabs yet .
20170616_145254.jpg

[martin]

I know someone on Youtube that has their Pursuit running @ 65mph with no chin walk at all, using a Turnigy XK 3674 - 2200kv motor on 6s. This is on a single 6s battery placed in front of the motor .

[MadProps]

thanks for the insight guys Im going to fix this hook in the hull and try setup again

[boatsrnew2me]

I know someone on Youtube that has their Pursuit running @ 65mph with no chin walk at all, using a Turnigy XK 3674 - 2200kv motor on 6s. This is on a single 6s battery placed in front of the motor .

theres more in mine yet ,a little tweaking i could hit 60 i think . and i could prop up a little yet too .motors pretty cool ,barely hits 100 degrees .

[CraigP]

I'm running my 29 Mono on 6s, two 2s cells on the sides and one mounted in the center, ahead of the ESC. I'm not getting any chine walk either. The weight distributed on the sides creates and effect called gyro damping, calming the side-to-side walking.

[Doby]

Im considering a monohull next and love the look of the 35" KOS, but think the better value is the TFL hulled Skull model Pursuit. I believe even the entry model Pursuit is probably a better boat, all things considered, but that Fountain inspired KOS looks really nice. Ive read a few things about the flimsiness of the Venom hull, which is naturally a concern as I would plan on 6s power. Thoughts please? Thanks to all.

I guess we never really asked you what you want the boat set up for...racing?...bashing??

[iop65]

Mine has a 3674 1900kv
5s 5000mah
50mph
No chine walk,but i blueprinted the bottom

[Linewbie]

I guess we never really asked you what you want the boat set up for...racing?...bashing??

Just sport running, no orgainzed racing, just tearing it up, thats all.

[Hydrocarbon82]

FYI the HK Pursuit is down to $160 atm, I bought it a month ago at $176. I bought an OSE flex and GoolRc 3674, and I should be able break even selling the unused SSS and original 2pc flex. 150A and m445 from another boat I'm selling. Their pics aren't up to date, it's the stinger model with the long black FRP rails & battery tray.

Turns like it's on rails, handles high speed over chop like it's nothing.

[MadProps]

after seeing a couple of the vids out there where the pursuit isnt walking around caused me to address a possible hook issue in the hull, there was a visible depression on both sides of the hull at the transom, after a light mist of black primer and block sanding showed it was worse than I thought, one side the depression is deeper and bigger in diameter so it must be causing the hull to chine walk. I poured some epoxy yesterday block sanded and primered
this morning.......I just came in from a test run and this runs like a different boat now...and I already liked the boat
time to start over with the setup/tuning

[Linewbie]

That will be the first thing I check. Thanks.

[iop65]

after seeing a couple of the vids out there where the pursuit isnt walking around caused me to address a possible hook issue in the hull, there was a visible depression on both sides of the hull at the transom, after a light mist of black primer and block sanding showed it was worse than I thought, one side the depression is deeper and bigger in diameter so it must be causing the hull to chine walk. I poured some epoxy yesterday block sanded and primered
this morning.......I just came in from a test run and this runs like a different boat now...and I already liked the boat
time to start over with the setup/tuning

Mine had the same issues,couple hours work......problem solved

[Hydrocarbon82]

I noticed the same thing on mine when trying to level the strut, I figured it could just be the design feature of the boat.