Tweet
I am trying to program some Aquastar 240's ESCs with 5692 1090kv leopards, I am using a Futaba 3PM radio with Futaba R603FS 2.4Ghz receiver and I have followed the instructions but I am only getting two very fast beeps and that is it. I have everything in the transmitter set to Zero (trims) and throttle range set on 100%, I have even tried reversing the Throttle in the transmitter still nothing. Now both the ESC's and Transmitter and Receiver came out of running boats. The ESC's are set at 10s, soft start, low voltage set as low as possible, the basics when setting up a ESC. I am hoping some one out there might have an idea to try something else. Thanks in advance for any help.
Aaron
Aaron