Question about some setup advise for a Genisis

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • siberianhusky
    Fast Electric Addict!
    • Dec 2009
    • 2187

    #1

    Question about some setup advise for a Genisis

    Setup question
    "Hi, I am in the middle of building one and are about to finish. Here's the setup I am using:

    2x Leo 3674 2200 kv
    2x Seaking 120A
    2x 4s1p 5000 mah
    40er Prop

    Once I have completed and did some test runs I am going to post some more info here!"

    Posted advise:

    "It is a combination, 3674 are for 150Km/h or more, this is extra weight if you plan to go at less than 90 Km/h, the same for batteries, same brand, same 'C", it is 140grs per cell.
    You will carry 500grs extra weight in total , this will increase the drag and amperage.

    to give you an idea, a single 350 grs motor pushes the Genesis above 100 Km/h. two motors will only help to reduce the slippage and get a better stability, but weight will increase. It is a good thinking to put less than 300 grs motors.
    These motors: are good for 6s twin:: http://hobbyking.com/hobbyking/store..._Inrunner.html or Sk3 1600 kv for more speed:less weight.
    Be carefull with the size of the Lipo, the floats are not so wide. Do not use less than 40Cbatteries. "

    Thoughts on this advice that was posted?
    If my boats upside down then who owns the one I thought I was driving the last two laps?
Working...