need help aquacraft minimono after market upgrades

[cliffy1974]

looking for some after market upgrades for my sons minimono we already have upgraded the esc and motor with turngy and
would like to upgrade everything else like turn fin , rudder , trim tab , ect . any help would be appreciated. thanks

[Wetter]

i am in the same pre·dic·a·ment for the pool only, that is why it is a nice paper weight today
modify somethn' else.
my opinion.

[Fella1340]

I have had good results with the wire drive, after I realigned the stuffing tube to motor and epoxied back together. It required me to remove the plastic tray which didnt come out nice. It know has a carbon fiber plate in its place. I chwnged servo position to do free up room. It has a 3800kv motor in it now. Next is 35 amp seaking esc,etc, etc. I had all parts on hand qnd would not hqve done it other wise. I still wonder why I bothered. align the wire, keep it lubed and setscrews secure qnd things wre good. It took the abuse of the 3800kx motor.

[kfxguy]

I have had good results with the wire drive, after I realigned the stuffing tube to motor and epoxied back together. It required me to remove the plastic tray which didnt come out nice. It know has a carbon fiber plate in its place. I chwnged servo position to do free up room. It has a 3800kv motor in it now. Next is 35 amp seaking esc,etc, etc. I had all parts on hand qnd would not hqve done it other wise. I still wonder why I bothered. align the wire, keep it lubed and setscrews secure qnd things wre good. It took the abuse of the 3800kx motor.

Are you running 2s or 3s with that motor?