Zonda carbon fiber n keclar question

[Zackthrills]

Guys I'm buying a Zonda kevlar and carbon fiber.I would like to know can you fit leopard motors and if so what is the biggest size you can fit in there and are you capable of putting 2 10 s batteries in it?or what is the largest battery pack you can fit into it? And what kind of speeds are you able to achieve with an engine upgrade and with the larger batteries would like to run two battery packswriting with two 4S battery pack and hopefully working my way up two 10sbattery packs if they will fit any help would be great.

[grsboats]

see this http://forums.offshoreelectrics.com/...ight=zonda+cat

[Mulisha]

I got TP power 4082 motors they fit well the motor mounts are for 540 cans you could probably fit a 4092 in not sure about anything bigger. Have 2 SF 200 in there and 2 5s 5000mah lipo and had to cut the battery tray to fit them in. It's quite a squeeze mine isn't the Kevlar but same deal. I think I have a pic in my album of the set up. ATM with 43x1.4 getting 95km/h and running great and going to up a bit in prop for some better speeds

[Zackthrills]

I have a 4092 more so all I would need is one more. A buddy of mine is selling me two esc's to use. Would love to fit two 10s packs but if you had a hard time during two 5s packs that might be all she can take

[Zackthrills]

I have a 4092 more so all I would need is one more. A buddy of mine is selling me two esc's to use. Would love to fit two 10s packs but if you had a hard time during two 5s packs that might be all she can take dI'd you have any room left? What do you think is the largest pack I can fit our has been fit. 2 packs?

[Mulisha]

I couldn't see 2 10s packs fitting you can fit 6s but would have to get a bit smaller mah. What speedy are you getting? 4092 would fit just looking at mine.

[Mulisha]

http://forums.offshoreelectrics.com/...chmentid=98217

[Zackthrills]

I have not ran it yet I haven't even got the boat yet I don't get it until next week. I just figured I would get some ideas before I do build it so that way I can know what to order. Do you have any videos of yours running it that I can see. Wow u painted it?

[Mulisha]

Got one vid its bit glitchy haven't uploaded it yet, need to read how still. It's just came white gel coat and got some stickers made for it. Last name is Hall that's where the hall n ass comes from

[Zackthrills]

Lol that's funny. I like it

[Zackthrills]

what props are you running on yours and what you think would be good with the bigger engines

[Mulisha]

43x1.4 cnc going up to 44x1.6 maybe still not sure. You could go 45 I would think with 4092 what kv motors are they?

[Zackthrills]

4092 1480kv

[Mulisha]

Yeah mine 2180kv so props would be quite different. Would be good to hear from some others about props for yours being alot lower kv. Is your coming with 1 piece shafts or 2 piece?

[Zackthrills]

One piece