Motor question for my proboat Blackjack 29

[MAMBA2200]

you will probably have to change the motor mount to get that motor to fit

[lenny]

You could have want with this motor on 6s and a lot less can for that size hull.http://www.hobbyking.com/hobbyking/s..._Inrunner.html

[Jason4636]

If you have already bout the 4082, just get you a rear ring support. And epoxy it into the wood, to help support the rear of the motor. After you put in the motor, get out you heat gun. And very slightly heat the tupper ware lid, and slightly stretch the lid. I've never done this, but I've read on here that what they done.

[lenny]

Hey Jason,
Did you try the black water line to see how it looked ?

[Jason4636]

Not yet, I've been stuck working 13 1/2hr days, just about ever since you suggesteed it.

[lenny]

Will that is good money stash,
Just tough I would ask about it.
I just got a mystic,
And trying to chase down strut and prop setups,
To make it run with out the rpm up and down at full throttle.

[Jason4636]

Here you go Lenny. Sorry it took me so long to get it on there.

[Jason4636]

Sorry for the Hi-jack

[lenny]

Hey,
It is all good info.
Or we can delete it if we want,
I like the first picture with just the black line.
It looks more pro mod to me.

[Jason4636]

Both pic's are of the same hose. One's just closer

[lenny]

I looked again,
I though in the first picture it did not have the loom on it.

[lenny]

What do you think of it with the black line now ?

[Jason4636]

I liked it both ways, just a little more pop with the orange hose

[lenny]

I try to blend it in or hide it some how,
But most of my boats are scratch and dent and need to be painted bad to.

[jsturess]

Hi

Can some one please tell me how long runtime I get with 5000mha, m445 prop and leopard 4082?
Do I get more runtime if change the motor to 4074 or would it be the same?

Regards Johan