New boat!!!
Collapse
X
-
-
House CleaningLast edited by twissted; 09-06-2012, 12:15 PM.twissted from speed. Lead, fallow or get out of the way. Copy cats in back of the buss!!!Comment
-
200 amp esc
House CleaningAttached FilesLast edited by twissted; 09-06-2012, 12:16 PM.twissted from speed. Lead, fallow or get out of the way. Copy cats in back of the buss!!!Comment
-
Not trying to be hard on you, just be upfront with what you are offering. People may want a little more info other then "custom pieces" If your going to stock some stateside, add a bec and caps, and try to sell them.....more power to you."There's nothing else I really want to do other than get up and build boats." - Mike FioreComment
-
BEC install
simple to install:
All you do is solder the UBEC input leads onto your speed control power input leads.
Plug the UBEC into your RX where you would plug in your Rx battery. - OR - Plug the UBEC into an standard on/off switch harness.
Make sure you disable your speed control's BEC.
kfs001a.jpgtwissted from speed. Lead, fallow or get out of the way. Copy cats in back of the buss!!!Comment
-
Here is a fighter cat Fantasm is well build and share the same hull.
http://www.youtube.com/watch?v=TipwgeOySQ0
There's a lot more speed capabilty in that hull. That boat was very mild and so stable a child could drive it at that speed!
If I build another one for myself it will run triple digit mph.Comment
-
Who are you trying to scam with that etti ESC pic? They both have wires...that's about where the similarities end.
Since you like copying my pics, here's one you might be interested in. It's a pic of what happens after running one of those cheap POS ESCs you want to sell for about 1 minute. Have fun with that.
Comment
-
I missed all the speedo fun, now the pics are gone I guess.......................Hull and hardware look nice thoughNEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE:http://forums.offshoreelectrics.com/...est!&highlight=
Comment
Comment