FC hv esc's

[kendt]

Not trying to start another FC bashing thread!! I just was browsing their site and noticed all the hv esc's have been removed. Anyone know whats up with that? Are they Ben's designs or something?

[battlefury]

They are still available from another source. Saw it days ago with a re brand badge . Prices are way lower than FC

[kendt]

Where did you see that? I will need one eventually for a rigger im working on.

[bull7]

link please??

[keithbradley]

Would you guys still be interested in buying these from another US based website?

[kendt]

If the price is fair i have no problems with it. I always like to support as many suppliers as I can.

[lars_01]

Yes, i would! If Ben is not in the business any longer i will buy from he who can supplie the 300A esc, I got 3 for now! Will need more in the future!:)
Lasse

[Nosbig]

Do it keith. But don't stock the 6S 300's until you get the problem sorted out, I don't know anyone who has run one successfully and not blown it up, mine almost burnt down my whole boat
Are you also going to be stocking hardware/ hulls etc? You should also become a haiyin dealer

[lars_01]

Yes, do it! I´m in for a 300A/6s when the problems are solved, just blow mine up on a 5s set-up Same small part just fried, nothing else warm. Neu1527.5Y 2p5s 5000Mah Prather 215!

[Basstronics]

Im going to be in the market for something 6-8s with some good amp handling.

Got a 5692 1320 KV and might switch out to a 1000 KV

I want headroom and flexibility.

I seen the copies on alibaba.com

[Brushless55]

They are still available from another source. Saw it days ago with a re brand badge . Prices are way lower than FC

Got a link?

[bull7]

http://fliermodel.en.alibaba.com/productgrouplist-213626141-1/Brushless_ESC_for_Boat.html

[bull7]

http://fliermodel.en.alibaba.com/pro..._for_Boat.html

this??

[Bullwink]

I have a FC 6S 300A ESC that I have installed but not used. It sounds like there have been problems with this particular ESC and I probably should not use it? I also have the bigger 2-8S ESC with extra cap bank. Has this one been performing OK? I had a bad ESC once (Sword 240) that totally burned up a boat that I had just built, lipos and all, and I do not want that to happen again.

[Basstronics]

I sent a message to see about pricing/ordering.

Im in need in near future so I inquired about the 3-16s 380A units.

I will post response when/if I get one.

I did come straight out the box that 10 pc order is to much due to not many customers buying this specific product... SO hopefully something can happen on the cheap.