Very nice and high quality boats

[Koutak]

Because the boys from the pond are serious, I will show you hot new item from the manufacturer MMProducts. It is a tunnel glider TRIDENT! Already I can not wait to lay him for water.Trident od MMProduts - novinka 2012.jpg

[Alfa Spirit]

Hey I'm sending video my Titus in driving.. http://www.youtube.com/watch?v=Vqysb...1&feature=plcp

Outerlimits It's my friend "kouťák " Here's his video.. http://www.youtube.com/watch?v=qUe5K_pUa_A

And here's video from our last reunion.. http://www.youtube.com/watch?v=mX-jv...eature=related


DJcz

Salut DJcz,
are you at full throttle on you videos with the TITUS ?

[Alfa Spirit]

Hey DJcz,

I ask you that because this setup look "light" for the TITUS, 1260mm, I will put the same setup in the RAPID, 980mm with two 6S 5000mAh wired in parallel.

Alain

[Rumdog]

lol...no. no you will not. You will put the setup next to the boat, and take pictures.

[Alfa Spirit]

[iamandrew]

2 6S packs wont fit in the hull

[Alfa Spirit]

No, 2 x 6S 6000mAh fit perfectly

I can build a twin 6S with 1400/1500 kv ....

[DJcz]

Plný plyn mam v 1:05min poznáš to podle zvuku.. Baterie je 6S2P.

Full trottle in 1:05min you know it by the sound. Batery is 6s2p.

[Alfa Spirit]

Very nice TITUS with a twin Hyperion setup http://www.tommis-raceboats.de/titus.htm

Here is the hardware and Scorpion motors for the Rapid

[brett657]

These boots are looking interesting but i searched and read that the experiences and opinions of racers that have been running that particular rc boot for 20+ years of , that these are hard to make handle because it's so narrow. It wouldn't matter if it was 2ft wide, if the same people had found it hard to make handle it then there is a great chance of it

[iamandrew]

yeah id have to say it definatly is narrow. i still havent got mine built yet because my dad used all my west system building some "real" boat parts.

I really want to build it and see how it goes. Ive got the persuit but the quality of the hull is terrible.
this thing is very nice. the version I got has one layer of carbon on the entire inside of the hull.

Ive seen a few youtube clips and it looks like it turns ok to me.

[Alfa Spirit]

Iamandrew, I think you' re building a Rapid? What kind of setup, single or twin, what motor and how many cells?

[Mike Caruso]

Very nice TITUS with a twin Hyperion setup http://www.tommis-raceboats.de/titus.htm

Here is the hardware and Scorpion motors for the Rapid

Very nice job.

[iamandrew]

Ive decided im going to change my setup from what I originally planned.
I am now going to run a single 4092 2080KV Leopard on 4S with somthing like a 45mm prop and leave it like that.
ive allready got 4 4S packs spare
I think the weight saved in this setup to what i was going to have, will probably make the boat just as fast
still going to use the 3/16 drive shaft.

I think the hull is too small to get the advantage of twin motors for a mono hul. the larger hull, yep

[Alfa Spirit]

Cool Rapid Outerlimits Reolica