Tweet
Lol yes I have deans on mine already. So maybe I will look for an esc that aldready has a lipo cutoff.
A.
What I would like most is to find a cat that is white so I can easily airbrush the hull. Are there any good cats out there other than the Miss Geico and the BlackJack? I don't know how much aquacraft will be charging for theirs but I hate the graffics (I guess that I am to picky). Maybe there are some hulls that are not rtr that I could buy but the problem is that I don't know everthing right now since I don't own a boat so I might not be able to set one up properly. I saw a video of a miss longlite but I can't find the hull anywhere and it is probably very expensive.
B.
The pursuit and prince you showed me are pretty nice. I only wish the prince was bigger than 25". But hey, it only requires a 3s or 4s lipo, and I have a 3s already! I do like the looks of the pursuit better but it is $145 more.
Pursuit: http://kintecracing.com/Pursuit.html
Prince: http://kintecracing.com/Prince_Upgrades.html
This is what Matt 1234 said after I asked him how he liked his prince he used to own:
"well it handled very well with a fast 380 motor in it. but if i were you i would upgrade to a 540 motor with a new motor mount, rip the stock battery tray out and lay 2x2s on either side of the motor. also i was going to lay carbon/kevlar sheet to strengthen the hull as it is very thin the stock hull. heres the carbon stuff that you can lay down. http://www.kintecracing.com/Building_Supplies.html Its the 3rd product down!! also i dont know who makes these hulls!
But if i were you i would get this boat. http://www.kintecracing.com/Pursuit.html/ It is the same as the 25" deep vee prince but only 32" long pretty much. it will handle alot better and you can put alot bigger motor in it! or you can just buy it with a 4074 2200kv leopard and a 120amp esc for $375 which is the top option on this URL. Then the second option is getting just the hull and the hardware and you put a motor of your own choice in it!! which is $230 for the hull and hardware which is the second option in the URL.but me myself if i got back into boating which i probably wont!! i would get the 32"deep vee with the motor and esc already installed. they also look better but it is your own personal preference on how much you want to pay i spose!!! let me know which one you are going to choose!! -matt"
C.
So I went searching around for other pursuits (other than the upgraded one listed above) and this is what I found:
Hobbyking has theirs: http://hobbyking.com/hobbyking/store...dProduct=16603 which for some reason says $437.40 but when you add the oversees one to your cart it says $185.17 + shipping which is about $60. Maybe if the U.S. one (which is supposed to be in stock this week) is $185.17 I should get it. However, the electronics are unfamiliar to me. Are they any good?
D.
Another member has the hobbyking one with a spektrum radio and receiver but it is $300 which seems like too much:
http://forums.offshoreelectrics.com/...ad.php?t=22626
A.
What I would like most is to find a cat that is white so I can easily airbrush the hull. Are there any good cats out there other than the Miss Geico and the BlackJack? I don't know how much aquacraft will be charging for theirs but I hate the graffics (I guess that I am to picky). Maybe there are some hulls that are not rtr that I could buy but the problem is that I don't know everthing right now since I don't own a boat so I might not be able to set one up properly. I saw a video of a miss longlite but I can't find the hull anywhere and it is probably very expensive.
B.
The pursuit and prince you showed me are pretty nice. I only wish the prince was bigger than 25". But hey, it only requires a 3s or 4s lipo, and I have a 3s already! I do like the looks of the pursuit better but it is $145 more.
Pursuit: http://kintecracing.com/Pursuit.html
Prince: http://kintecracing.com/Prince_Upgrades.html
This is what Matt 1234 said after I asked him how he liked his prince he used to own:
"well it handled very well with a fast 380 motor in it. but if i were you i would upgrade to a 540 motor with a new motor mount, rip the stock battery tray out and lay 2x2s on either side of the motor. also i was going to lay carbon/kevlar sheet to strengthen the hull as it is very thin the stock hull. heres the carbon stuff that you can lay down. http://www.kintecracing.com/Building_Supplies.html Its the 3rd product down!! also i dont know who makes these hulls!
But if i were you i would get this boat. http://www.kintecracing.com/Pursuit.html/ It is the same as the 25" deep vee prince but only 32" long pretty much. it will handle alot better and you can put alot bigger motor in it! or you can just buy it with a 4074 2200kv leopard and a 120amp esc for $375 which is the top option on this URL. Then the second option is getting just the hull and the hardware and you put a motor of your own choice in it!! which is $230 for the hull and hardware which is the second option in the URL.but me myself if i got back into boating which i probably wont!! i would get the 32"deep vee with the motor and esc already installed. they also look better but it is your own personal preference on how much you want to pay i spose!!! let me know which one you are going to choose!! -matt"
C.
So I went searching around for other pursuits (other than the upgraded one listed above) and this is what I found:
Hobbyking has theirs: http://hobbyking.com/hobbyking/store...dProduct=16603 which for some reason says $437.40 but when you add the oversees one to your cart it says $185.17 + shipping which is about $60. Maybe if the U.S. one (which is supposed to be in stock this week) is $185.17 I should get it. However, the electronics are unfamiliar to me. Are they any good?
D.
Another member has the hobbyking one with a spektrum radio and receiver but it is $300 which seems like too much:
http://forums.offshoreelectrics.com/...ad.php?t=22626
I would buy a used non RTR V hull from the swap shop on this site, as you have the other goodies...29" or under.
Comment