Tweet
I ran a personal best 126 mph for this boat and best speed overall with any boat for me this morning. This is my second JAE 33FE that I purpose built lighter and stronger for SAW runs.
It's setup on 8s with a Castle XLX2 ESC and a TP Power 4050 2300kv CM motor. The prop I ran is an ABC 1921-19-38 that I prepped. I've got 8 gage wiring as short as possible with QS8 connectors. I'm running two SMC 6200 mAh 250C SRD series lipos in series.
The setup on the boat was as loose as I've ever ran it so far.
It pulled 363.9 amps and 10,134 watts at 50,044 rpm's. Best of all the ripple current was 1.39 volts (4.6%). I have the mouse on the lowest lipo voltage in this screenshot, it's 27.38 volts(3.42 per cell).
It should be able to run this all day, right? What do you think?
Here's the screenshot of the Data Log...
Screenshot (17).png
It's setup on 8s with a Castle XLX2 ESC and a TP Power 4050 2300kv CM motor. The prop I ran is an ABC 1921-19-38 that I prepped. I've got 8 gage wiring as short as possible with QS8 connectors. I'm running two SMC 6200 mAh 250C SRD series lipos in series.
The setup on the boat was as loose as I've ever ran it so far.
It pulled 363.9 amps and 10,134 watts at 50,044 rpm's. Best of all the ripple current was 1.39 volts (4.6%). I have the mouse on the lowest lipo voltage in this screenshot, it's 27.38 volts(3.42 per cell).
It should be able to run this all day, right? What do you think?
Here's the screenshot of the Data Log...
Screenshot (17).png
Comment