Tweet
After accuiring a Mystery 80A speed controller from DiegoBoy I have endlessly searched many forums for programming this thing. After finding a whole bunch of different "Programming" procedures heres the one that works. Found right here on OSE.
You can change multiple settings at a time. Start at full throttle and after the little music notes it will sound those codes for that parameter. Once you hear the code for the parameter that you want to change go full brake quickly then back to full throttle. When at full brake you should've hear a single beep meaning you set that parameter, then it will start from the begining and you do the same for any other parameter you want to change. when done return throttle to neautral postion and you will hear the startup tone followed by one or two beeps depending on which brake setting you chose.
NOTE: I use a Airtronics FM 75mhz radio and I need to use a PiStix for it to work.
George
You can change multiple settings at a time. Start at full throttle and after the little music notes it will sound those codes for that parameter. Once you hear the code for the parameter that you want to change go full brake quickly then back to full throttle. When at full brake you should've hear a single beep meaning you set that parameter, then it will start from the begining and you do the same for any other parameter you want to change. when done return throttle to neautral postion and you will hear the startup tone followed by one or two beeps depending on which brake setting you chose.
NOTE: I use a Airtronics FM 75mhz radio and I need to use a PiStix for it to work.
George
Comment