Tweet
Hi guys,
I have a 32"deep Vee, 540 XL 11T, 180A Esc, 3/16 flex cable-shaft.
I ordered a Graupner 3217 45mm prop to test it since the old one(43mm bronze, don't know what brand)wasn't in a good condition and it is longer about 5mm, so the tail nut can't lock at the back since I can't move the shaft. Any ideas what prop should I use for this setup?
Also I am turning a ProBoat mini Vee to brushless, I have a Seaking 3600kv moter and 60A Esc and thinking of replacing the stock saft with a .098 flex cable that ends to a 1/8 shaft, any ideas and what prop should I use for this one too?
I am thinking for an Octura x431 for the mini v and an Octura x445 for the 32" deep vee.
Please share with me your opinion...
I have a 32"deep Vee, 540 XL 11T, 180A Esc, 3/16 flex cable-shaft.
I ordered a Graupner 3217 45mm prop to test it since the old one(43mm bronze, don't know what brand)wasn't in a good condition and it is longer about 5mm, so the tail nut can't lock at the back since I can't move the shaft. Any ideas what prop should I use for this setup?
Also I am turning a ProBoat mini Vee to brushless, I have a Seaking 3600kv moter and 60A Esc and thinking of replacing the stock saft with a .098 flex cable that ends to a 1/8 shaft, any ideas and what prop should I use for this one too?
I am thinking for an Octura x431 for the mini v and an Octura x445 for the 32" deep vee.
Please share with me your opinion...