Ajoda 200 amp esc?

[Ub Hauled]

http://www.maytech.cn/eng/proesc.asp

Here tis. Scroll on down

Also same said unit

http://www.pulsosystem.com/esc/hv.html

Also found some interesting cap related info at

http://endless-sphere.com/forums/vie...hp?f=28&t=8987

I have something similar to the Maytags, had have not a chance to test yet...
Will soon. Ken Joye did and said it's a good ESC.

[DISAR]

I had bought the Maytech 200A, programming with USB was funny, sometimes like this sometimes like that. Conclusion is that this is ESC is Burnt now (6s1p, KB45 8xl, 43mm prop) lasted for 2 runs and then white smoke. 200$ in the bin. I have very bad experience with Chinese ESCs.

[Ub Hauled]

I had bought the Maytech 200A, programming with USB was funny, sometimes like this sometimes like that. Conclusion is that this is ESC is Burnt now (6s1p, KB45 8xl, 43mm prop) lasted for 2 runs and then white smoke. 200$ in the bin. I have very bad experience with Chinese ESCs.

Sorry to hear that, the deal with Chinese "emulated" ESCs is that one can never tell if it'll be a good ESC or another one that smokes...
sometimes water plays a burning role in the faith of ESCs, or the motor or even sometimes cells cannot supply the ESC with enough juice...

one thing is for sure, copies of good ESCs never are the same as the originals...

[sailr]

Is ANYONE interested in buying my big ESC?
Make me an offer!
I'm open to trades too. Whatcha got?

I have the programming instructions for it.

[Alfa Spirit]

I searched informations about this controller ... NOTHING !!

I think this is an "exotic" hand made water colled ESC. I bougft a HIMODEL GX 200, which one is the same than a Mystery ESC

[sailr]

which one did you search for? The one I have for sale is a SUPPO. You can see it here:

http://www.suppomodel.com/

I also have the programming instructions.

[bustitup]

which one did you search for? The one I have for sale is a SUPPO. You can see it here:

http://www.suppomodel.com/

I also have the programming instructions.

so is this esc marked 200 amp HV? and is 15s?

and It seems the low voltage cutoff is automatic in that the esc detecs the abount of cells you have and cuts off automatic?

[Gerwin Brommer]

Himodel/mystery can't be compared to the suppo/schulze !!!
Suppo/schulze has only ONE board with fet's !
Sailr : I have to pay for a few parts for my fullscale boat.
If any money is left after that I'm more than willing to pay the 150 bucks for your suppo.
Solder two brass tubes directly on the board, and replace the caps.
Full "wet-protect" or "plastik 70" treatment and there it is, a nice esc.

[Gerwin Brommer]

@ Bustitup :

yeah, it almost looks like a real esc huh ?? :-) :-)

[rockwerks]

@ Bustitup :

yeah, it almost looks like a real esc huh ?? :-) :-)

To me it looks nearly identical to the Himodel/mystery except for less caps and half the FET's

[bustitup]

@ Bustitup :

yeah, it almost looks like a real esc huh ?? :-) :-)

Gerwin


does schulze look exactley like this esc? and programs the same way?

[bustitup]

To me it looks nearly identical to the Himodel/mystery except for less caps and half the FET's

sailr posted the physical dimensions and this esc is twice the size of mystery

[Alfa Spirit]

I searched informations about this controller ... NOTHING !!

I think this is an "exotic" hand made water colled ESC. I bougft a HIMODEL GX 200, which one is the same than a Mystery ESC

I' m talking about this exotic model



The Seaking looks right but I heard there are problems with this ESC.

HIMODEL GX 200 is very good, with water colling system

[Gerwin Brommer]

Rockwerks :

show me a link with a good picture of the Mystery/Himodels please ?

Bustitup : looks very simmilar. Progamming a Schulze : by dipswitches

[Alfa Spirit]