Tweet
Hi have the following Transmitter and RX bought form Hobbypartz, FLY SKY FS-GT3B Digital 3-Channel 2.4ghz. I have sucessfully bound one RX to tranmitter . Have had zero sucess binding the other RX to this transmitter/radio . Have followed hobbypartz online video to bind these products . I am trying to set this transmitter up to use on my other boat. The RX flash's slowly on a fully charged battery. The first RX indicator light flashed quickly and bound no problem. I also bought a spare and that won't bind ether I am stumped.
-
-
Which version of RX did they send you? I went thru this myself , I had the FS-GR3E and had no trouble binding, then they are out of stock and I ordered the current version which is FS-GR3F , for the life of me I couldn't bind them and I had to send them to Oscar in Texas, he told me that the current version ( blue) label had the label printed very confusingly. On the old ones you put the binding plug in channel 3 slot and power the rx on the top slot.
The blue ones you need to put the binding plug in the top slot and power the rx in the ch.3 slot.
Give that a try.
I hope I remembered correctly, Oscar sent them back with the plugs in the right place
, but it's been more than a month and I am a bit foggy, ( memory IS the first thing to go).
Too many boats, not enough time...
-
I found the thread , link: http://forums.offshoreelectrics.com/...502#post598502Too many boats, not enough time...Comment
-
Bind squince is not the same per video DOH!! . My boss big time RC car/truck had show me how dumb I am, bind plug in top slot. I would be nice if parts suppliers would look at the stuff the sell. All good now fella's Thank's . PaulWhich version of RX did they send you? I went thru this myself , I had the FS-GR3E and had no trouble binding, then they are out of stock and I ordered the current version which is FS-GR3F , for the life of me I couldn't bind them and I had to send them to Oscar in Texas, he told me that the current version ( blue) label had the label printed very confusingly. On the old ones you put the binding plug in channel 3 slot and power the rx on the top slot.
The blue ones you need to put the binding plug in the top slot and power the rx in the ch.3 slot.
Give that a try.
I hope I remembered correctly, Oscar sent them back with the plugs in the right place, but it's been more than a month and I am a bit foggy, ( memory IS the first thing to go).Comment
Comment