What speed control?

[iridebikes247]

Nice find, I would ditch the y connector for cooling and run cooling to esc first then motor. Some prefer to cool the motor first, if the setup is right it will work fine either way. To install another pickup not worth it imo, I mainly run twin cats and run only 1 pickup for each motor/esc combo and this works fine.

If 2200kv then start on 4s, work up to 5s. Esc I would say the swordfish 220a available in the store on this site.

[paDDY]

Was this in florida? I was about to buy it local if so

It's shipping out of Florida so I assume its the same one you saw locally. Do u mind telling me what you thought of it and how much they were asking?

[paDDY]

Nice find, I would ditch the y connector for cooling and run cooling to esc first then motor. Some prefer to cool the motor first, if the setup is right it will work fine either way. To install another pickup not worth it imo, I mainly run twin cats and run only 1 pickup for each motor/esc combo and this works fine.

If 2200kv then start on 4s, work up to 5s. Esc I would say the swordfish 220a available in the store on this site.

Thanks, I will give that a try and plug the other exit line.

[785boats]

Paddy.
You might as well try it the way it is first. If the streams are reasonably equal, there would be no reason really to change it. It obviously worked for the other owner.
It's just that I wouldn't have set it up that way in the first place.