Official Dinogy Lipos Graphen 2.0 Thread

[MarkF]

Good to hear Bob.

Mark

[robw]

any 8s 5000+mah ?

[dmitry100]

I'm also interested in 8s long packs...

Mark, what gauge leads do your Graphene packs come with? Do you know why most companies never make them with anything bigger than 10 gauge? I've been trying to figure out ways of doubling the leads... for high amp setups.

[MarkF]

I use to make the 8s, 10, and 12s packs for special order. But new shipping regulations has put an end to that. The factory wont take chances on shipping the big packs anymore. I use 10 awg because that is all you really need. I use to make some with 8 awg but people complained it was to hard to solder plugs. If you really want bigger wire you can cut the shrink off yourself and add any size wire you want. I can send you new shrink wrap and labels if needed.

Mark

[MarkF]

A lot of you guys know Dinogy won a lot of races at the NAMBA Nats this year. But at the saws going on in LA today Brian B just broke the P Hydro record using 2 dinogy 4s 3300 Graphenes in parallel to an average speed of 138 mph. He had a one way pass at 141 mph. These were the same packs he ran at the nats and not new batteries.
Congratulations Brian on the new record.

Mark

[MarkF]

Brian's winning rigger.


Mark

[srislash]

A lot of you guys know Dinogy won a lot of races at the NAMBA Nats this year. But at the saws going on in LA today Brian B just broke the P Hydro record using 2 dinogy 4s 3300 Graphenes in parallel to an average speed of 138 mph. He had a one way pass at 141 mph. These were the same packs he ran at the nats and not new batteries.
Congratulations Brian on the new record.

Mark

Congrats Brian and congrats to you Mark on the new Line

Shawn

[zooma]

I don't see any 4 or 6 cell graphines in stock yet.

[NativePaul]

I like light weight as in Naviga our batteries are weight limited, with these cells how much capacity can I get in 2s+3s for <110g, 2s+3s for <280g, and 4s+6s for <560g?

[LarrysDrifter]

I've been checking the website for 3s 5000mah graphine packs.
Do you know when these will arrive?

[MarkF]

Sorry guys. Customs has had my order since 11/2 I am still waiting for them to release it. They have up to 45 days to make a decision. That 45 days is about up so I hope they will release my order this week. Once it's been released, I will have it in 1 to 2 days. I will let it be known here when I find out a delivery date.

Mark

[MarkF]

Well customs has released my order and 1 box came in today with the other 7 tomorrow hopefully. But I did get some 6s 6000 packs in for those that were wanting some. I will post when more sizes show up.

Mark

[MarkF]

Hi everybody.
I got my order in and added all the packs to the site now. Packs you were waiting for are in stock now.
Thanks for your orders

Mark

[ray schrauwen]

Brian's winning rigger.


Mark

Congrats to Brian. What motor is under that hood?

[Fluid]

Here ya go:http://forums.offshoreelectrics.com/...egg#post677944