Diegoboy's Stretch Renegade rigger

[Diegoboy]

Install the turn-fin, Install the battery connector, and she's DONE!

[tylerm]

I dont think you'll find anything smaller or more suitable from a bike shop than what you've got. I have worked in a bike shop before and those a probably the most suitable ones i have seen. Although i will still not use them, they are a bit stiff for my liking. Especially when i can get 12 nice rubber boots for $4 US

[Diegoboy]

You are correct, they are much stiffer than we require. (thick rubber)

[6S HYDRO]

id give 25.00 for the cooler, also id thing about reinforcing the turnfin wood with some carbon plate- mine broke off in a hard corner, and i had to epoxy it back together w/ a thick piece of shock tower carbon i had lyin around

[egneg]

You are correct, they are much stiffer than we require. (thick rubber)

Try petsmart - nipples (bottle) for newborn small pets work great and have a double lip - just have to enlarge the hole for the servo rod.

[Diegoboy]

but those are the wrong color. They're teet brown!

[Diegoboy]

id give 25.00 for the cooler, also id thing about reinforcing the turnfin wood with some carbon plate- mine broke off in a hard corner, and i had to epoxy it back together w/ a thick piece of shock tower carbon i had lyin around

After careful consideration, my initial response was "no" but I have decided to let it go. so, "Yes"
(hoping I dont regret it later)

[6S HYDRO]

well cool, ive been low on funds lately so you can have a week or so to reconsider.

[Diegoboy]

Just let me know when you're ready

[egneg]

but those are the wrong color. They're teet brown!

So use black sharpie.

[Meniscus]

After careful consideration, my initial response was "no" but I have decided to let it go. so, "Yes"
(hoping I dont regret it later)

I think that's wrong. If I'm not mistaken, that was custom made for the original. That just seems a shame, especially since he can pickup an Astro cooler for his purposes. I'd sooner give you $25 not to see it broken up. It's one of the integral elements of the design for that one in particular. While you're at it, I'll take the left sponson please...

Just my opinion, and I'll get off the soapbox.

[Diegoboy]

While you're at it, I'll take the left sponson please...

Just my opinion, and I'll get off the soapbox.

...but the right sponson has the water pick-up.

[Meniscus]

I know, I wouldn't have had the heart to even jokingly mention that one.

I'm not saying anything else about it. I just seems a shame.

[6S HYDRO]

What is an astro cooler, the only reason i even asked diego is because i have already contacted steve elias and he told me you cant get one. This is the only one as i was informed. Correct me if wrong

[Diegoboy]

I don't know what an Astro cooler is, but Steve E told me that the cooler on this motor was also a prototype that he had custom machined for it.