H&M Freya hull finishing

[ArnoudRC]

Bit of detailing during Christmas


Verzonden vanaf mijn iPhone met Tapatalk

[Panther6834]

Bit of detailing during Christmas


Verzonden vanaf mijn iPhone met Tapatalk

I like...simplistically bold.


~ More peace, love, and kindness would make the world a much better place

[1coopgt]

Bit of detailing during Christmas


Verzonden vanaf mijn iPhone met Tapatalk

Looks great. Is it an optical illusion? It looks like your rudder isn't straight up and down. Looks like the front bottim tip is kicked back a little. If it is it may cause some issues .

[ArnoudRC]

Hi, no. The position is ok. [emoji108]


Verzonden vanaf mijn iPhone met Tapatalk

[Alfa Spirit]

You can make your own PDF files with wanted logos and a pro will print your file on clear or white adhesive vinyl, You choose logos and their size.

[tubben]

Think there decals are from the same supplier.

[koen]

H&M and MHZ they have excellent decals

[tubben]

My Freya.DSC_1035.jpg

Skickat fr?n min XQ-AS52 via Tapatalk

[ArnoudRC]

H&M and MHZ they have excellent decals

I know. Had some high quality vinyl sponsor decals laying around. Personal touch and saved quite some money


Verzonden vanaf mijn iPhone met Tapatalk

[jaike5]

Lose the Y fitting. Water follows the path of least resistance. I use a manifold to get full pressure to both the motor and esc. You can also restrict the esc line out with a zip ty to equalize the pressure in both lines if you choose to leave the Y in. Not a fan of restriction!
Happy New Year!!
cheers, Jay.

[ArnoudRC]

H&M Freya hull finishing

Thank you! Wish you also all the best. On the y connector. You are right. I?m working on a water pump to get enough pressure through a single line (>esc> motor) Will test that setup.


Verzonden vanaf mijn iPhone met Tapatalk

[1coopgt]

Thank you! Wish you also all the best. On the y connector. You are right. I?m working on a water pump to get enough pressure through a single line (>esc> motor) Will test that setup.


Verzonden vanaf mijn iPhone met Tapatalk

Why not use a duel pick up rudder or a inhull pickup through the bottom of the boat in one of the ride pads. A lot less weight than adding a water pump. Plus you wouldn't be eating up run time powering a water pump.