ROB
Changing ESC's is not going to lower your AMP draw.
The 180,s should be fine.
Just make sure they are programed correctly.
I did have trouble programing and syncing mine to my radio.
I had my ESC,s wired so that each one saw 4S2P -power (this way the two batteries stay equal, instead of the outside motor pulling the outside battery way down)
I had to disconnect the two black wires between the two ESC,s
Then program them separately and sync them to my radio.
Instead of soldering the two black wires back together, I connected them with a plug.
So now when I want to change the program, I can just unplug them from each other,
The ESC;s will not program correctly if connected in parallel.
Larry
Changing ESC's is not going to lower your AMP draw.
The 180,s should be fine.
Just make sure they are programed correctly.
I did have trouble programing and syncing mine to my radio.
I had my ESC,s wired so that each one saw 4S2P -power (this way the two batteries stay equal, instead of the outside motor pulling the outside battery way down)
I had to disconnect the two black wires between the two ESC,s
Then program them separately and sync them to my radio.
Instead of soldering the two black wires back together, I connected them with a plug.
So now when I want to change the program, I can just unplug them from each other,
The ESC;s will not program correctly if connected in parallel.
Larry
Comment