Tweet
ok, I've been reading some of the other posts, an one tip if it helps is,
what I did before gluing the top sheets of the sponsons , I soaked them in
50% alcohol an 50% HOT water, this help me form the sheets , soak them
till they r pliable , towel off excess water , clamp or type down to sponson
an let dry , now the sheet should hold the shape, now glue it down,
the plywood in my ML GP310 is high quality , its the 2nd ML boat I own,
I also had a ML PS295 I got from Ron Shaw . Im planning to get a GP400,
I need more speed. LOL ,
I hope this tip helps some1.
what I did before gluing the top sheets of the sponsons , I soaked them in
50% alcohol an 50% HOT water, this help me form the sheets , soak them
till they r pliable , towel off excess water , clamp or type down to sponson
an let dry , now the sheet should hold the shape, now glue it down,
the plywood in my ML GP310 is high quality , its the 2nd ML boat I own,
I also had a ML PS295 I got from Ron Shaw . Im planning to get a GP400,
I need more speed. LOL ,
I hope this tip helps some1.