MHZ Mystic 1380mm build

[nata2run]

The plan is to have the components under the carbon and purple anodized under the cutouts. Just printing templates at the moments to see if it fits nicely. Unfortunately I'll be using a lot of carbon. Few hundred bucks. Grrreee. But don't want to compromise. Have to finish of the battery treys. Also working on the template/jig to cut the holes for the drives. Carbon should arrive before the weekend.

[drwayne]

OSE CF bat trays are cheap at 12US ea.. I understand the uber need to do everything yourself, what I dont understand is the need to waste so much time copying something readily available from a friend ?
Cripes, Bruiser will be on the water before you !

ps. love ya work !
DocW

[nata2run]

Wayne, if I just buy the parts off the shelf it won't be mine entirely. Needs my signature on it hehe. Plus I want 3.5mm carbon. I'll buy screws and stuff I can't make.

[drwayne]

http://www.hydroworld.de/vb/showthre...ick-Drive-quot

Just emailed with a purchase request for 2x.
Thx for the info
W

[nata2run]

Nice!!! May pinch of you when not looking. LOL

[nata2run]

Servo, hoses and small bits are here. No carbon just yet. Still working on the jigs to drill the holes for the stingers. May be a busy weekend if everything gets here in time.

[nata2run]

drawing and files now ready for cutting, slight mods to the motormounts but will explain later. NOW WHERE is the carbon grrrr.
The mounts will fit almost any motor including the 30 series Lehner, just incase LOL

mountsCNC.jpg

[drwayne]

Very nice Mate !!!!
.
Almost perfect.
Why cut C5000 in middle when you know these are for my Drambuie ?
S'pose I could cover ...
hahaha

seriously nice work, mate
seriously disappointed it doesnt say D.O.I. !!


You ready for a chilly run in the concrete puddle ?
zoom zoom ..............
love your work !

W

[Remmie81]

Wauw! That drawing of the carbon parts looks smoking hot!!!!!
Cant wait to see the result man!

[nata2run]

Thanks for the compliments ....LOL that's funny....DOI hey nah c5000 is just fine. Spend some time after work cutting the parts, the carbon came in after all, other sheet is coming from the US. They also have silver, blue and red. If I only knew before.
And damn straight I'm ready for the pond.

[nata2run]

Thanks Remmie, I can't wait to see the result my self. Will have to wait till tomorrow, they are still covered in protective tape and stuck to the sacrificial sheet. Have to clean up and run some superglue around the edges to seal. Should have them ready by tomorrow.

[drwayne]

Hey Kent

Will discuss eng mounts for the DOI in morning.

ZOOM ZOOM
TFL56 ready to go .... charged batts in, esc/motor tested, ready for the sealing 2M of deck tape !
Looking forward to making waves !

[Prop-a-Gator]

Carbon bits look great! Can't wait to see this build really get going. I think the purple should be translucent and back-lit!!
Also looking forward to seeing DrW's uber Genesis hit the water. Does anyone sell the painted 56" Genesis hull in the States?

[nata2run]

Thanks gator, don't think that hasn't been on my mind lol. I even have the panels for the backlid. Got blue and white but could ad the purple film. Could even insert acrylic into the cuts so it would be flush. Hmm but the window on the cowl should be clear..."...nah come on LOL

[Prop-a-Gator]

Yes! Now that's what I'm talking about! Easy for me to say. lol
You can always save the extra bling for later - when 90 mph passes get boring.