MHZ Mystic M 1140mm build

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • drwayne
    Fast Electric Addict!
    • May 2008
    • 2981

    #316
    Originally posted by srislash
    When it was in the Geico with the 1515,I guess I hit a stick and the prop must've bit because it did show a spike of 450 amps.Kept going though.
    Ouch !
    1515 is working hard for 220A.. 450+ is holybrowntime ! hehehe
    Wayne Schutte PhdCSE BaSE BaEE. Australian, & damn proud of it YOUTUBE
    @ 36" H&M Maritmo twin1512/1800 6S1P 88mph @ 40" drag hydro#1 twin 5692 12S1P .....always for fun @

    Comment

    • drwayne
      Fast Electric Addict!
      • May 2008
      • 2981

      #317
      Hi Kent.

      Fellow in Qld just confirmed hull type.
      The newest in my cathouse will soon be a Mystic C5000 114. !
      He claims 2x1527/1.5D(1550) on 6s to x447/3=~150kms
      Your 1717(1580) on 6S should hit around that mark.

      B)
      Last edited by drwayne; 03-20-2012, 03:39 AM.
      Wayne Schutte PhdCSE BaSE BaEE. Australian, & damn proud of it YOUTUBE
      @ 36" H&M Maritmo twin1512/1800 6S1P 88mph @ 40" drag hydro#1 twin 5692 12S1P .....always for fun @

      Comment

      • nata2run
        customcfparts.com
        • Nov 2011
        • 1837

        #318
        Originally posted by drwayne
        Hi Kent.

        Fellow in Qld just confirmed hull type.
        The newest in my cathouse will soon be a Mystic C5000 114. !
        He claims 2x1527/1.5D(1550) on 6s to x447/3=~150kms
        Your 1717(1580) on 6S should hit around that mark.

        B)
        I knew I would get you hooked LOL, just can't resist
        Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
        "Follow someone's footsteps and you will always be a step behind"

        Comment

        • drwayne
          Fast Electric Addict!
          • May 2008
          • 2981

          #319
          Originally posted by nata2run
          I knew I would get you hooked LOL, just can't resist
          Roll your 1st cat over and measure strut cavity plz..
          Id rather use existing h/w from one the previous dozens, than source more for this toy.... !
          Attached Files
          Wayne Schutte PhdCSE BaSE BaEE. Australian, & damn proud of it YOUTUBE
          @ 36" H&M Maritmo twin1512/1800 6S1P 88mph @ 40" drag hydro#1 twin 5692 12S1P .....always for fun @

          Comment

          • nata2run
            customcfparts.com
            • Nov 2011
            • 1837

            #320
            You have to be more percise where you want measurement from, as there are cavities all around. If we call the measurement ABC from left to right C=120mm but where to measure AB?
            Last edited by nata2run; 03-20-2012, 06:33 AM.
            Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
            "Follow someone's footsteps and you will always be a step behind"

            Comment

            • nata2run
              customcfparts.com
              • Nov 2011
              • 1837

              #321
              A66mm B37mm B is from the bottom point of tunnel sharpest point to where strut mounts
              Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
              "Follow someone's footsteps and you will always be a step behind"

              Comment

              • drwayne
                Fast Electric Addict!
                • May 2008
                • 2981

                #322
                Originally posted by nata2run
                A66mm B37mm B is from the bottom point of tunnel sharpest point to top of where strut mounts
                AB is face where stinger mounts
                I think you've sorted it.
                Thx
                W
                Wayne Schutte PhdCSE BaSE BaEE. Australian, & damn proud of it YOUTUBE
                @ 36" H&M Maritmo twin1512/1800 6S1P 88mph @ 40" drag hydro#1 twin 5692 12S1P .....always for fun @

                Comment

                • nata2run
                  customcfparts.com
                  • Nov 2011
                  • 1837

                  #323
                  So twins with twins on the lake soon hey? Sounds good to me.
                  Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
                  "Follow someone's footsteps and you will always be a step behind"

                  Comment

                  • drwayne
                    Fast Electric Addict!
                    • May 2008
                    • 2981

                    #324
                    Originally posted by nata2run
                    So twins with twins on the lake soon hey? Sounds good to me.
                    Twins WOT on that lake will sound/look awesome....
                    I'll slow down so we run parallel.


                    will have 1816/3 ready weeks before the cat.. will test them on your toy and see what happens !
                    Wayne Schutte PhdCSE BaSE BaEE. Australian, & damn proud of it YOUTUBE
                    @ 36" H&M Maritmo twin1512/1800 6S1P 88mph @ 40" drag hydro#1 twin 5692 12S1P .....always for fun @

                    Comment

                    • srislash
                      Not there yet
                      • Mar 2011
                      • 7673

                      #325
                      Originally posted by drwayne
                      Ouch !
                      1515 is working hard for 220A.. 450+ is holybrowntime ! hehehe
                      I've only logged spikes of 180 on the 1515,that was with the M445.Thankfully that 450 spike was only that,just a mark on the prop.

                      Comment

                      • srislash
                        Not there yet
                        • Mar 2011
                        • 7673

                        #326
                        Originally posted by drwayne
                        Twins WOT on that lake will sound/look awesome....
                        I'll slow down so we run parallel.


                        will have 1816/3 ready weeks before the cat.. will test them on your toy and see what happens !
                        I look forward to a vid of the twin twins.Cool!

                        Comment

                        • nata2run
                          customcfparts.com
                          • Nov 2011
                          • 1837

                          #327
                          Originally posted by drwayne
                          Twins WOT on that lake will sound/look awesome....
                          I'll slow down so we run parallel.


                          will have 1816/3 ready weeks before the cat.. will test them on your toy and see what happens !
                          I got 1816/3 coming as well as 4518/3 in steel LOL yeah make sure you slow down plenty get ready for big lake and fix up rescue boat
                          Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
                          "Follow someone's footsteps and you will always be a step behind"

                          Comment

                          • drwayne
                            Fast Electric Addict!
                            • May 2008
                            • 2981

                            #328
                            rescue's at the ready, M8 !
                            It's no race boat.. but good fun @ approx 35km wot !!
                            About to grab a cheapazz 2.4 TxRx for this beasty.. 14.99 from HC !!!!!!
                            Wayne Schutte PhdCSE BaSE BaEE. Australian, & damn proud of it YOUTUBE
                            @ 36" H&M Maritmo twin1512/1800 6S1P 88mph @ 40" drag hydro#1 twin 5692 12S1P .....always for fun @

                            Comment

                            • drwayne
                              Fast Electric Addict!
                              • May 2008
                              • 2981

                              #329
                              Kent, whAt distance from shaft centerline to hull, or whats the largest diam prop it takes ? W
                              Wayne Schutte PhdCSE BaSE BaEE. Australian, & damn proud of it YOUTUBE
                              @ 36" H&M Maritmo twin1512/1800 6S1P 88mph @ 40" drag hydro#1 twin 5692 12S1P .....always for fun @

                              Comment

                              • srislash
                                Not there yet
                                • Mar 2011
                                • 7673

                                #330
                                Oooh,did you catch Brushless55's ad.He's got 3 1717's.I only need one more NIB.I am very tempted.

                                Comment

                                Working...