MHZ Mystic M 1140mm build

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • drwayne
    Fast Electric Addict!
    • May 2008
    • 2981

    #256
    Originally posted by nata2run
    LOL My point ...electrics are old technology... bring in the H2O powered "machines", Auto COG correction, titanium on the fly adjustable pitching self sharpening props. 300 mph capable, the list goes on LOL. Here we are stuck in the century with the boat upside down LOL....
    auto-righting hulls are old tech..we're just too lazy to implement it I guess .. !
    Wayne Schutte PhdCSE BaSE BaEE. Australian, & damn proud of it YOUTUBE
    @ 36" H&M Maritmo twin1512/1800 6S1P 88mph @ 40" drag hydro#1 twin 5692 12S1P .....always for fun @

    Comment

    • nata2run
      customcfparts.com
      • Nov 2011
      • 1837

      #257
      Hello,
      Nothing new BUT. I'm getting more water in the hull than what I like! I thought ill pump some air into the hull and use soapy water around areas where it can escape.
      If you decide to do this be very carefull, dont pump more air in than what you can blow, you could expand and crack the hull. Air is a powerfull thing!! but I found the problem. now have to get more liquid tape and reseal.

      MHZ - Bobbles from drives.jpgMHZ - Bobbles from rudder & stear.jpg
      Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
      "Follow someone's footsteps and you will always be a step behind"

      Comment

      • drwayne
        Fast Electric Addict!
        • May 2008
        • 2981

        #258
        We've almost a rescue boat, Kent

        23" self righting jet drive mono... cut hull and fitted jet drive tonight.. epoxy is drying now..
        then fit motor, esc, batts and steer,, another 2Hrs maybe.. !
        Zoom Zoom !!!

        W
        Wayne Schutte PhdCSE BaSE BaEE. Australian, & damn proud of it YOUTUBE
        @ 36" H&M Maritmo twin1512/1800 6S1P 88mph @ 40" drag hydro#1 twin 5692 12S1P .....always for fun @

        Comment

        • nata2run
          customcfparts.com
          • Nov 2011
          • 1837

          #259
          Ha! Classic. Nice work, any pics?
          Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
          "Follow someone's footsteps and you will always be a step behind"

          Comment

          • nata2run
            customcfparts.com
            • Nov 2011
            • 1837

            #260
            Hello,
            New boat rescue stand in place, no idea if it will rescue anything LOL guess I have to find out and post vid.

            Rescue - Boat stand 01.jpgRescue - Boat stand 02.jpgRescue - Boat stand 03.jpgRescue - Boat stand 04.jpg
            Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
            "Follow someone's footsteps and you will always be a step behind"

            Comment

            • drwayne
              Fast Electric Addict!
              • May 2008
              • 2981

              #261
              looks too fast for me, m8.
              Well done

              swapped motor today for my rescue toy, have epoxied fingers atm .. Thinking 3S2P for rescue, or 6S1P for fun.. problem is my rescue boat may l end up needing rescue !
              Lucky I have the sprintcat for that, hey ...
              hahaha
              Wayne Schutte PhdCSE BaSE BaEE. Australian, & damn proud of it YOUTUBE
              @ 36" H&M Maritmo twin1512/1800 6S1P 88mph @ 40" drag hydro#1 twin 5692 12S1P .....always for fun @

              Comment

              • nata2run
                customcfparts.com
                • Nov 2011
                • 1837

                #262
                Got her out again today. Me driving, was good fun! Can tell that she's not pulling enough power as the GPS logged 11 min of runtime. And only 95 km/h. A quick calculation here on OSE, Spinning 32269.92 rpm should only give you about 96km/h with 447's maybe time to try something bigger. But it was still loads of fun, and she looked good. DocW got some vid on his iPhone, so when ever he is ready hehe. I think I will stick to this setup for a few weeks till I get comfortable with this setup, pond is very small for that kind of speed. I would like to try some 648's, maybe looking into some bling stainless steel props from Germany.
                Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
                "Follow someone's footsteps and you will always be a step behind"

                Comment

                • nata2run
                  customcfparts.com
                  • Nov 2011
                  • 1837

                  #263
                  Went out to grab a bite with the missus, and had a walk over to the other lake, now where was the boat??

                  Evening by the lake.jpg
                  Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
                  "Follow someone's footsteps and you will always be a step behind"

                  Comment

                  • cyprus31
                    Senior Member
                    • Jun 2011
                    • 140

                    #264
                    Keep Walking..... Kent

                    Comment

                    • nata2run
                      customcfparts.com
                      • Nov 2011
                      • 1837

                      #265
                      Originally posted by cyprus31
                      Keep Walking..... Kent
                      There is never a boat around when you need it. I can tell you, my boat would have rocked on there. LOL
                      Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
                      "Follow someone's footsteps and you will always be a step behind"

                      Comment

                      • drwayne
                        Fast Electric Addict!
                        • May 2008
                        • 2981

                        #266
                        Originally posted by nata2run
                        There is never a boat around when you need it. I can tell you, my boat would have rocked on there. LOL
                        Imagine the howl of twins on this lake !!
                        It's alright mate, I'll give you a head start

                        Kent is camera shy "dont show me on the video" and coincidentally FYI iPhone video is garbage.. there's not much worth watching between the edits where I removed the man
                        Wayne Schutte PhdCSE BaSE BaEE. Australian, & damn proud of it YOUTUBE
                        @ 36" H&M Maritmo twin1512/1800 6S1P 88mph @ 40" drag hydro#1 twin 5692 12S1P .....always for fun @

                        Comment

                        • drwayne
                          Fast Electric Addict!
                          • May 2008
                          • 2981

                          #267
                          Epilogue:
                          IMHO iPhone 4S camera is not worth a damn .. my previous Nokia N97 is 5000% better for both still and movie.
                          Apple 1080mov loses sync with audio.. pixelates & generally a POS.

                          sorry ppl, no vid of today's runs
                          Wayne Schutte PhdCSE BaSE BaEE. Australian, & damn proud of it YOUTUBE
                          @ 36" H&M Maritmo twin1512/1800 6S1P 88mph @ 40" drag hydro#1 twin 5692 12S1P .....always for fun @

                          Comment

                          • cyprus31
                            Senior Member
                            • Jun 2011
                            • 140

                            #268
                            What happened and you had to walk all this way. Did you had failure or you just flipped it?

                            Comment

                            • srislash
                              Not there yet
                              • Mar 2011
                              • 7673

                              #269
                              Originally posted by nata2run
                              Got her out again today. Me driving, was good fun! Can tell that she's not pulling enough power as the GPS logged 11 min of runtime. And only 95 km/h. A quick calculation here on OSE, Spinning 32269.92 rpm should only give you about 96km/h with 447's maybe time to try something bigger. But it was still loads of fun, and she looked good. DocW got some vid on his iPhone, so when ever he is ready hehe. I think I will stick to this setup for a few weeks till I get comfortable with this setup, pond is very small for that kind of speed. I would like to try some 648's, maybe looking into some bling stainless steel props from Germany.
                              You'll probably like the extra pitch Kent.That is my next choice.Hopefully next weekend with Andy from AC Boats.BTW That lake looks awesome.Is that the new house over there?

                              Comment

                              • nata2run
                                customcfparts.com
                                • Nov 2011
                                • 1837

                                #270
                                Oh no no never got the boat in this lake. I went for a walk with my wife after dinner ( to the other lake) and that's what it looked like, nice and calm.
                                Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
                                "Follow someone's footsteps and you will always be a step behind"

                                Comment

                                Working...