MHZ Mystic M 1140mm build

[nata2run]

....and now there mine to play with

[nata2run]

Hello,
Spend all day stripping hardware and wet sanding. She should be good to go in on Monday for her new color, hehe.amazingly I didn't need any filler just came up smooth by sanding. Well at least now I get some time to buff up the parts, and get it all ready for the Lehners. I think I will still use the Leopards for a bit just to see what I can get out of her. Also want to get the lehners looked at or serviced, being second hand. I'm also turning me stand into a rescue boat so combo stand/rescue, only for the fact that it's too hard to take a second boat. This way I know I always have a rescue boat with me. Will post a picture a bit later

[srislash]

Hello,
Spend all day stripping hardware and wet sanding. She should be good to go in on Monday for her new color, hehe.amazingly I didn't need any filler just came up smooth by sanding. Well at least now I get some time to buff up the parts, and get it all ready for the Lehners. I think I will still use the Leopards for a bit just to see what I can get out of her. Also want to get the lehners looked at or serviced, being second hand. I'm also turning me stand into a rescue boat so combo stand/rescue, only for the fact that it's too hard to take a second boat. This way I know I always have a rescue boat with me. Will post a picture a bit later

OK,I can't wait to see this creation.

[brian j]

If I remember correctly you offered me $300 I replied with $415. After doing that I said to myself that would be stupid to sell them so cheap. So I read listed them on eBay and wasn't going to let them go for anything under $500. Now of to Australia. They came out my Iceberg MHZ and going into another MHZ.

[nata2run]

GUYS!
My new motor stand in progress, just going to attach some pool nodles on the botton rods, and she should be floating. And ofcause a servo. Guys this is early stages so be gentle :)
this way I asways have a rescue boat with me. And yes! the rescue boat stand will have a maiden soon :)

Boat stand -1.jpgBoat stand -2.jpg

[millzee]

I'm very interested to see the finished stand/boat, good luck, great idea!

[cyprus31]

Hi nata2run
my name is Nicholas and I am from Cyprus. I am really impressed of your work here. The esc mount and also the servo mount are really perfect. Becasue I am also waiting for my Mystic 114 to be delivered please let me know if you could do the same set for me and to mail them to Cyprus. Is also the servo arm made by you? Would love to have also one of those. Are you using a low profile servo or standard? I have found the red bolts and nuts under the web address http://www.spotonrc.com.
Thanks for your reply

[nata2run]

Hi Nicholas,
I have sent you a pm with some details. One thing I forgot, the servo arm I didn't make, and yes I'm using a low profile servo. I'm using the spektrum but would have used the savox if it was easy to get here.

[nata2run]

Hello everyone,
With a bit of luck I will get the hull back tomorrow from the painters. Don’t expect the world, it will be simple!
In the meantime I thought I would bring up some of the comments I hear, just to help you guys that might be building as well.
Here is goes!
Should really get the water pickup closer to the tunnel about 7mm, and about 18mm from the end. (Its possible I measured, but already cut the squares for the pickups.) you don’t have to use pickups either, a simple brass or aluminium tube will do (3mm bore or so)
Also bring the steering wires closer together on the servo arm, as you may have too much steering with little movement and loose torque of the servo. The ratio should be 1:1 if possible (so if the wires are 30mm apart on the rudder, they should be 30mm apart on the servo.)
All are very important points that should be addressed.

[silver]

Thanks, good info hope to fined some time to finish my 114 if I see how you dit everything so smood and fast.
hope I get everything don when spring start here in Belgium.
Good luck building your painted 114 and I waiting for more pics of your Nice Boat
regards Jim

[nata2run]

Thanks, good info hope to fined some time to finish my 114 if I see how you dit everything so smood and fast.
hope I get everything don when spring start here in Belgium.
Good luck building your painted 114 and I waiting for more pics of your Nice Boat
regards Jim

Thank you Silver,
Do we get you see your build?? I would love to see some more MHZ builds on here.

[brian j]

2280???

Those motors should be arriving soon. Please let me know when they do .

[nata2run]

Those motors should be arriving soon. Please let me know when they do .

Sure will you'll be the first to know!

[nata2run]

Ok,
Back with a few upgrades.
Got the hull painted and just putting things back hoping for another succesfull maiden
MHZ Mystic - Painted hull1.jpgMHZ Mystic - Painted hull inside1.jpgMHZ Mystic - Painted hull inside.jpgMHZ Mystic - Painted hull2.jpg

[battlefury]

The interior color combo really stands out even the floatation are colored to match. good job