MHZ Mystic M 1140mm build

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • srislash
    Not there yet
    • Mar 2011
    • 7673

    #91
    Perhaps that's why I don't have all these heat issues that everyone keeps blabbing about.If we hit 30 degrees in the summer it's hot.Usually stays 13-22 celsius year round.

    Comment

    • nata2run
      customcfparts.com
      • Nov 2011
      • 1837

      #92
      Spot on! I wish I could run my boats in 5 degrees c man I would push them hard.
      Last edited by nata2run; 01-24-2012, 08:58 AM.
      Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
      "Follow someone's footsteps and you will always be a step behind"

      Comment

      • nata2run
        customcfparts.com
        • Nov 2011
        • 1837

        #93
        Eagle tree logger just landed V4 heavy duty 150A 80V - Will I be ok with this??? logging is new to me
        Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
        "Follow someone's footsteps and you will always be a step behind"

        Comment

        • nata2run
          customcfparts.com
          • Nov 2011
          • 1837

          #94
          Today is just.....
          All hardware from MHZ just walked in the door. 2 days off from work ...mmm.... should be a good 2 days
          Last edited by nata2run; 01-25-2012, 12:28 AM.
          Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
          "Follow someone's footsteps and you will always be a step behind"

          Comment

          • nata2run
            customcfparts.com
            • Nov 2011
            • 1837

            #95
            Hello everyone!
            I thought I'd post a picture of the flex safe system I just installed. I may have to cut some more of the stuffing tube as its very close to the collett. but it spins well and look promesing.
            Also gluing the new propshaft to the flex cable as we speak. hope for a run this weekend

            MHZ Mystic - Flex Safe.jpg
            Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
            "Follow someone's footsteps and you will always be a step behind"

            Comment

            • 6BOOST
              Senior Member
              • Sep 2011
              • 286

              #96
              Looking fantastic=) Do you mind telling us where you got the flex saver? Looks nice:)

              6BOOST
              6boost Turbo Manifolds, Australia's number 1 turbo kit specialist and manufacturer

              Comment

              • nata2run
                customcfparts.com
                • Nov 2011
                • 1837

                #97
                Don't mind at all boost it's from MHz powerboats
                Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
                "Follow someone's footsteps and you will always be a step behind"

                Comment

                • srislash
                  Not there yet
                  • Mar 2011
                  • 7673

                  #98
                  Originally posted by nata2run
                  Today is just.....
                  All hardware from MHZ just walked in the door. 2 days off from work ...mmm.... should be a good 2 days
                  I have had a couple days myself and I'm trying to pick which build is next,Jet boat or Hydro.
                  The flex saver looks good in there.I may have to do that in the next Cat

                  Comment

                  • nata2run
                    customcfparts.com
                    • Nov 2011
                    • 1837

                    #99
                    Hello Everyone,
                    I was hoping for a run this weekend but didnt happen oh well maybe during the week. I did install some plates for the new eagle tree or the GPS. No big deal but it will work.

                    MHZ M Mystic - inside Hull Eagle Tree 1.jpg MHZ M Mystic - inside Hull Eagle Tree 2.jpg MHZ M Mystic - inside Hull Eagle Tree 3.jpg
                    Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
                    "Follow someone's footsteps and you will always be a step behind"

                    Comment

                    • nata2run
                      customcfparts.com
                      • Nov 2011
                      • 1837

                      #100
                      Funny thing, shes only been 3 minutes in the water and I'm thinking Lehners......lol.
                      Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
                      "Follow someone's footsteps and you will always be a step behind"

                      Comment

                      • srislash
                        Not there yet
                        • Mar 2011
                        • 7673

                        #101
                        Ah heck,how many cells can you fit in?

                        Comment

                        • nata2run
                          customcfparts.com
                          • Nov 2011
                          • 1837

                          #102
                          Well at the moment 6s at 5000mah 2p fit just fine. Total of 10000mah
                          so 12s 5000mah in series. I can fit a little more if I have to I'm looking into 6s 3200mah 4p so I can have 12s at 6400mah total or 6s at 12800 mah in total


                          wooom at 100mph I hope
                          Last edited by nata2run; 01-31-2012, 12:39 PM.
                          Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
                          "Follow someone's footsteps and you will always be a step behind"

                          Comment

                          • srislash
                            Not there yet
                            • Mar 2011
                            • 7673

                            #103
                            There ya go.Zooom
                            Just remember things get tragic around that speed.

                            Comment

                            • nata2run
                              customcfparts.com
                              • Nov 2011
                              • 1837

                              #104
                              I know lol... Chances are I won't! 80mph I start shaking LOL
                              Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
                              "Follow someone's footsteps and you will always be a step behind"

                              Comment

                              • 6BOOST
                                Senior Member
                                • Sep 2011
                                • 286

                                #105
                                You can buy 6600mah packs off the shelf so why bother running all the extra wiring associated with 4 seperate batteries when you can do it with one?

                                6BOOST
                                6boost Turbo Manifolds, Australia's number 1 turbo kit specialist and manufacturer

                                Comment

                                Working...