Something a little different (scratch built)

[shockerman80]

Here is a little project ive been working on for a while now. (Some of you will remember it from the red board)

2 8l kb45's (looking for other options)
2 4s 30c poly rcs
2 hydra 120s
442's

Its only in rough primer right now and it needs a little work but it should be done in time for the big thaw. Let me know what you think.

[goldendesign04]

SWEET!

Seriously, looking good, i like the cockpit seat

-Wayne

[shockerman80]

It will actually have four of them when its done im waiting for the casting materials to make fiberglass resin copies of them.

[RCprince]

You made that, wow, lost for words.....

[ace028]

That looks great!!

[Stealth Assassin]

No way... That's Insane! I like It. Great job on the Interior.

[Avanti]

that is sick

I want one!

[Stealth Assassin]

Also, that's alot of primer sanding in there! :)

[robby76]

what are the dimensions? and weight? if you haven't purchased the motors yet, how about the;
Ammo Motor 2300kv 36-50, Two year warranty

SPECS:
Motor Diameter: 1.42" (36mm)
Motor Length: 1.97" (50mm)
Shaft Diameter: 0.197" (5mm)
Shaft Length: 0.591" (15mm)
kV Rating: 2300 rpm/volt
Weight: 8.6oz (243g)
Input Voltage: 14.8-18.5V
Max. Constant Current: 60A
Max. Surge Current: 100A
No Load Current: 2.0A

http://www.offshoreelectrics.com/pro...od=dh-gpmg5290

[Avanti]

what are the dimensions? and weight? if you haven't purchased the motors yet, how about the;
Ammo Motor 2300kv 36-50, Two year warranty

SPECS:
Motor Diameter: 1.42" (36mm)
Motor Length: 1.97" (50mm)
Shaft Diameter: 0.197" (5mm)
Shaft Length: 0.591" (15mm)
kV Rating: 2300 rpm/volt
Weight: 8.6oz (243g)
Input Voltage: 14.8-18.5V
Max. Constant Current: 60A
Max. Surge Current: 100A
No Load Current: 2.0A

http://www.offshoreelectrics.com/pro...od=dh-gpmg5290

I would guess 45" or bigger judging by the pics. that ammo motor would not be enough for this boat (but I could be off)

[RCprince]

Avanti if that boat is 45 inches...That ammo would burn up along with your esc

[Avanti]

the boat is probably over 50" and will require more power than a 2300kv ammo I would imagine twins of some sort or one monster motor. (but this is all speculation let wait for the owner to chime in)

[fastbaltek]

i think itd be kinda hard on the motors but then again as long as its 4s to each motor then itd be fine.

[fastbaltek]

like running 2 sv27 at the same time?

[shockerman80]

The boat is 42" long and yes the ammo and or the sv setups would probably vanish into a plume of smoke in it. I used to run fegaio 8xls in it on 4s but they struggled to much with it. I runs well with the kb45 8ls in it but the quality of them there motors is horrible. They are out of balance ( and yes ive tried to balance them with no avail) and really lack power for their size and weight. I really want to run neus but thats a big chunk of change for two motors.