Build pics of my Aeromarine Titan 33

[OshkoshMono]

These two pics are the only ones I have uploaded so far.

[OshkoshMono]

I had a little mishap with the cowl, so I'm waiting for a new one from aeromarine (should be here in a day or two) but since this pic the hull has been sprayed with pearl and green flake mixed im with the nason urethane clear. Once i get the new cowl and paint it, I'll give the whole boat another coat or two of clear just to make it really glossy and polishable. The next step with the drilling holes and epoxying is what I'm most nervous about...

[OshkoshMono]

More pics with clear and flake

[Brushless55]

I love the color!
what wind are you going with on the motor?

[OshkoshMono]

Thanks. I am pretty happy with it so far. It needs more clear to smooth out the dimples ect... The motor is a Feigao 540XL "Extra Long".

[Brushless55]

right on man.. is it a 8XL or 9XL?

[OshkoshMono]

Oops, forgot that part. It's a 12xl. That's what was reccomended by OSE. I hope it works well.

[eboat]

What are you using for batteries and how many ?

[Make-a-Wake]

Very nice boat, especially the paint job!

[j.m.]

12XL.... 6s?

:D

Jon

[OshkoshMono]

12XL.... 6s?

:D

Jon

Not a good idea? I have no idea how to match up the motor. This is just what Steve said to go with. Should I be running a different motor?

[OshkoshMono]

Very nice boat, especially the paint job!

Thanks.

And to answer your question eboat. I was planning on running dual 3s 8000 packs. Or similar. 2-3s 5400 ect.. Maybe dual 7 cell packs on rough water slower days... not totally sure yet. Batteries are the only part i haven't purchased yet.

[Brushless55]

Not a good idea? I have no idea how to match up the motor. This is just what Steve said to go with. Should I be running a different motor?

that sounds like a decent setup

[j.m.]

Sorry if you misunderstood my post, I was just making a guess as to what batteries you were going to run. So yeah, your boat will be powered by 6s LiPo. Sounds good!

Jon

[OshkoshMono]

Oh ok, great. I was hopeing I didn't misunderstand what Steven said to order and got the wrong motor. I hope it runs good. The water around here is usually 2-6" chop so a ton of top speed isn't needed, i just want the thing to jump out of the water when I goose it from a stop or slow speed. Lots of out of the whole take-off anyway. I got 3 graupner (spelling?) 2 blade props to try 40, 42, and 45mm I think. I'm guessing 3 blade will be what I'll end up running. 3 blade would be the best acceleration right?